Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Philips Dateigröße: 1.89 mb Dateiname: Unterrichtssprache:

. Reduce heat gain through windows by stopping direct sunlight with curtains or blinds. Awnings are also helpful by creating shade around the windows. Keep windows and doors closed except when ventilating the room. . It is good practice to ventilate the room occasionally to rid the room of stale air. PRODUCT DESCRIPTION Figure below illustrates the important components of the air conditioning unit. Front Cover Auxiliary controller Indicating lamps Vertical louver Horizontal louver Remote controller Air filter Pipe and electrical Drain hose AUXILIARY CONTROL Figure below illustrates the auxiliary control on the fan coil. This can be used to operate / control the air conditioner when the remote controller is not available or lost. Test Use to operate the air conditioner under "COOL" mode. All other functions will not be effective. The air conditioner will automatically stop operating after 30 minutes. This is to test if the air conditioner is in working condition. Remote In this position, the air conditioner is controlled by the remote controller. Auto Use to by-pass the remote controller. The air conditioner will operate automatically when power is supplied. The remote controller is ineffective in this position. Red indicating lamp Red light will be lit when electrical power is supplied to the air conditioner. Green indicating lamp This green lamp will be lit when the compressor starts operating. It indicates cooling operation is in progress. It will blink if the operating temperature is abnormal. REMOTE CONTROL OPERATION CONTROLS AND INDICATORS Figure below illustrates the various controls and indicators of the LCD wireless remote control. MODEL: AMW 25, 30 MODEL: AMW 45, 60 OPERATING INSTRUCTIONS Before operating the unit for the first time, it is necessary to install the batteries in the remote controller. . Batteries are located at the back of the remote controller (Model AMW25, 30) and at the front of the remote controller (Model AMW45, 60). . Open the battery holder by simultaneously pushing downwards and inwards at the area marked "OPEN" . Use only "AAA" alkaline batteries . Dispose of used batteries correctly, in a manner not causing pollution or harm to the environment. OPERATING GUIDE MODEL: AMW 25, 30 . Start air conditioner. Point the remote controller at the fan coil and press ON/OFF button. . Select the operational mode. Press either "Cool", "Dry" or "Vent" button to select the desired mode. . Set temperature. Press "+" or "-" button to set desired temperature. . Select fan speed. Press "Fan" button to select desired fan speed. . Set airflow position. Press "Vane" button to adjust airflow direction or to set vane to auto swing. . Set Timer. If required, press "Time" button to set timer On or Off. After pressing "Time" button, the Time display on the LCD will start to flash. Press "+" or "-" to set the time before flashing stops. . Sleep mode. Select sleep mode by pressing "Time:" button until "Sleep" appears on the LCD display. Sleep mode allows the air conditioner to raise the room temperature by up to 2°F from set temperature while you sleep to save power. MODEL: AMW 45, 60 . Start air conditioner. Point the remote controller at the fan coil and press "ON/OFF" button. . Select operation mode. Press "Mode" button to select any of the following modes: "Cool", "Dry" or "Vent". . Temperature setting. Press "+" or "-" button to set desired temperature. . Select fan speed. Press "Fan control" button to select desired fan speed. . Select airflow direction. Press "Louver control" button to set position of horizontal vane or set it to auto swing. . Set Timer. If desired, set timer on or off by pressing "Time Control" button, followed by "+" or "-" button to select time before air conditioner starts or stops operating. . Sleep mode. Press "Sleep" button to select sleep mode. A s the name suggests, it is used during sleeping. The room temperature would be adjusted by 2°F up from set temperature to save power. 2) FUNCTIONS AUTO This allows the air conditioner to operate automatically at a pre-set temperature. Cooling will be affected when room temperature is above 82°F (28°C). COOLING When activated, the fan will automatically operate at high speed for 5 minutes before operating at the set speed. During...

Herunterladen

Geben Sie zwei Ziffern: