Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Mitsubishi Electronics Dateigröße: 1.4 mb Dateiname: 0411873HH0701.pdf Unterrichtssprache:

Resulting in full heat exchange. Lossnay ventilate setting is used for cooling in the summer and heating in the winter period. Models LGH-15 to 100 RX4 Models LGH-150 and 200 RX4 Damper Damper Exhaust air Return air Exhaust air Return air Fresh air Supply air Fresh air Supply air Return air Fresh air Exhaust air Supply air Lossnay core Lossnay core ¦ BY-PASS VENTILATE setting The fresh air passes through the Lossnay core(s) and the return room air is exhausted direct. Lossnay bypass ventilate is normally operated during the spring/autumn months. Models LGH-15 to 100 RX4 Models LGH-150 and 200 RX4 Damper Damper Exhaust air Return air Exhaust air Return air Supply air Fresh air Fresh air Supply air Exhaust air Return air Fresh air Supply air Lossnay core Lossnay core ¦ AUTOMATIC VENTILATION setting The automatic damper mode automatically provides the correct ventilation for the conditions in the room. The following shows the effect “By-pass” ventilation will have under various conditions. 3 English Remove all dust and dirt on air filters and Lossnay core(s) at regular intervals in order to prevent a deterioration in the Lossnay functions. Guideline: Clean the air filters once a year. Clean the Lossnay core(s) once two year. Removing the parts 1) Maintenance cover Locate and remove the cover fixing screw. Pull back the hinged clip. Open the door and lift off of the hinge brackets. 2) Lossnay core(s) Take hold of the handle and draw the Lossnay cores out from the main unit. Model LGH-15 RX4: .................................................. 1 core Models LGH-25 to 100 RX4: ..................................... 2 cores Models LGH-150 and 200 RX4: ................................ 4 cores 3) Air filters After pulling out the Lossnay core(s), pull the air filters, located at the bottom left and right of the Lossnay core(s), off the velcro that holds them in place. Models LGH-15 RX4: ................................................ 2 filters Models LGH-25 to 100 RX4: ..................................... 4 filters Models LGH-150 and 200 RX4: ................................ 8 filters Cleaning the parts 1) Air filters Use a vacuum cleaner to remove light dust. To remove stubborn dirt wash in a mild solution of detergent and lukewarm water. (under 40°C) CAUTION • Do not use the hard nozzle of the vacuum cleaner. It may damage the exposed surfaces of the Lossnay core(s). • Under no circumstances should the Lossnay core(s) be washed in water. Maintenance Models LGH-15 to 100 RX4 Models LGH-150 and 200 RX4 CAUTION • Never wash the filters in very hot water and never wash them by rubbing them. • Do not dry the filters by exposing them to a flame. 2) Lossnay core Use a vacuum cleaner to suck up the dust and dirt on the exposed surfaces of the Lossnay cores. Use a soft brush only to clean exposed surface areas. Corner Vacuum cleaner (with brush attachment) Lossnay core Do NOT wash in water. Vacuum cleaner Air filter Hinge Hinge bracket Maintenance cover Maintena...

Herunterladen

Geben Sie zwei Ziffern: