Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Kenmore, modell CS-E9JKKW-1

Hersteller: Kenmore
Dateigröße: 1.64 mb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Check the following before calling for servicing.Check the following before calling for servicing. SYMPTOMSYMPTOM CHECKCHECK Heating/Cooling operation is not working efficiently. >• Set the temperature correctly. • Close all doors and windows. • Clean or replace the filters. • Clear any obstruction at the air inlet and air outlet vents. Noisy during operation. >• Check if the unit has been installed at an incline. • Close the front panel properly. Remote control does not work. (Display is dim or transmission signal is weak.) >• Insert the batteries correctly. • Replace weak batteries. The unit does not work. >• Check if the circuit breaker is tripped. • Check if timers have been set. The unit does not receive the signal from the remotecontrol. >• Make sure the receiver not obstructed. • Certain fluorescent lights may interfere with signaltransmitter. Please consult authorized dealer. The unit stops and the timer indicator blinks. Use remote control to retrieve error code. TIMER SET CANCEL ON OFF 1 2 3 SET CHECK CLOCK RESET AC RC 1 Press for 5 seconds. 3 Press for 5 seconds to quit checking. 2 Press until you hearbeep sound, thenwrite down the error code. Note: • For certain errors, youmay restart the unit forlimited operation with 4beeps during operation starts. 4 Turn the unit off and reveal the error code to authorized dealer. INFORMATION INFORMATION Information for Users on Collection and Disposal of Old Equipment and used Batteries [Information on Disposal in other Countriesoutside the European Union] These symbols are only valid in the EuropeanUnion. If you wish to discard these items, please contact your local authorities or dealerand ask for the correct method of disposal. Contact your country hazardous waste disposal hotline. Note for the battery symbol (bottom twosymbol examples): This symbol might be used in combination witha chemical symbol. In this case it complies withthe requirement set by the Directive for thechemical involved. Pb FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE • Checking of remote control batteries. • No obstruction at air inlet and air outlet vents. • After 15 minutes of operation, it is normal to have the following temperature difference between air inlet and air outlet vents: Cooling: . 46.4°F Heating: . 57.2°F SERVICEABLE CRITERIAS TURN OFF POWER SUPPLY then please consult authorized dealer under the following conditions: • Abnormal noise during operation. • Water/foreign particles have entered the remote control. • Water leaks from Indoor unit. • Circuit breaker switches off frequently. • Power cord becomes unnaturally warm. • Switches or buttons are not functioning properly. FOR EXTENDED NON-USE • Activate Heat mode for 2~3 hours to remove moisture left in the internal parts thoroughly to prevent mould growth. • Turn off the power supply. • Remove the remote control batteries. MEMOMEMO MEMOMEMO FAN SPEED AIR SWING FAN SPEEDMODE QUIET TEMP OFF/ON A...