Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Bryant Dateigröße: 172.1 kb Dateiname: Unterrichtssprache:

12 ELECTRICAL REQUIREMENTS • ELECTRICAL GROUNDING INSTRUCTIONS This appliance is equipped with a three-prong(grounding) plug for protection against possible shock hazards. If a two-prong wall receptacle is encountered, the customer is required to contact a qualified electrician and have the two-prong wall receptacle replaced with a properly grounded three-prong wall receptacle in accordance with the National Electrical Code. WARNING : To avoid death, personal injury or properly damage due to electrical shock, this unit must be grounded. Do not under any circumstances cut or remove the round grounding prong from the plug. Do not use a two prong adapter. • USE OF EXTENSION CORD Because of potential safety hazards under certain condition, we strongly recommend against the use of an extension cord. However, if you still elect to use an extension cord, it is absolutely necessary that it will be a UL listed 3-wire grounding type appliance extension cord rated has a 3-blade grounding plug and a 3-slot receptacle that will plug into the appliance. The marked rating of the extension cord should be 125V/13A minimum. WARNING : To avoid death, personal injury or properly damage due to electrical shock, do not use an extension cord or pinch the power cord. Do not remove the warning tag from the power cord. 13 BEFORE CALLING FOR SERVICE When you find something wrong with your room air conditioner, please carefully check the following items. If you are unable to find the cause of trouble, contact your service dealer. Difficulty Possible Cause Suggested Solution • Air conditioner does • No power to unit. • Set Fan Control Select to not operate. position other than "OFF". • Confirm power cord is plugged in. • Verify main power switch (main circuit breaker) or fuse of the unit is good. • Little or no cooling • Compressor lockout on initial plug in. • Dirty air filter • Is there anything blocking the front? • Thermostat is not adjusted correctly. • Air conditioner undersized for application. • Wait 3 to 4 minutes and restart the unit. • Clean air filter. • When blocked by curtains, blinds, or furnitures, etc., the air flow is restricted and cooling performance is affected. • Adjust thermostat correctly. • Check with dealer to determine proper unit capacity for application. • Noisy unit • Loose parts • Weak building construction. • Water hitting fan. •Tighten any loose parts. • Provide additional support. • Normal in high humidity. • Stop noise by allowing water to drain from base fan through drain hole. • Ordors from unit • Mold, mildew or algae formation on wet surfaces. • Place algaecide tablet in base pan • Remove water in base pan through drain hole. • Water in base pan. • Normal for operation in humid areas. • Water in base pan is picked up by the fan blade and thrown onto the warm outdoor coil where water then evaporates. 14 Limited Warranty DAEWOO ELECTRONICS CORPORATION OF AMERICA warrants the following window room air-conditioner to be free from de...

Herunterladen

Geben Sie zwei Ziffern: