Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
• There is risk of electric shock. When the product is not be used for a long time disconnect the power supply by turning off the breaker. • There is risk of product damage or failure, or unintended operation. Take care to ensure that nobody could step on or fall onto the outdoor unit. • There could result in personal injury and product damage. Do not insert hands or other objects through the air inlet or outlet while the air conditioner is on. • There are sharp and moving parts that could cause personal injury. Operating Instructions Auto Operation ON Cooling Healthy Dehumidification Auto Heating (Heat pump model only) To lower the temperature To raise the temperature (Cooling Only model) (Heat Pump model) Press the Start/Stop button. The unit will respond with beep sound. Open the door on the Remote Controller. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature. If you want to change the set temperature, press the Room Temperature Setting buttons. The set temperature will be changed considering room temperature. DURING AUTO OPERATION: . You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule. . If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must set the mode and the desired temperature again. . During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down automatically. If you want to stop auto-swing, press the chaos swing button again. 1 2 3 Owner's Manual 13 Operating Instructions Healthy Dehumidification Operation ON Cooling Healthy Dehumidification Auto Heating (Heat pump model only) (Cooling Only model) (Heat Pump model) Press the Start/Stop button. The unit will respond with beep sound. Open the door on the Remote Controller. To select Healthy Dehumidification Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Set the fan speed. You can select the fan speed in four steps - low, medium, high, or CHAOS. Each time the button is pressed, the fan speed mode is shifted. DURING HEALTHY DEHUMIDIFICATION OPERATION: . If you select the dehumidification mode on the operation selection button, the A/C starts to run the dehumidification function, automatically setting the room temp. and air volume to the best condition for dehumidification based on the sensed room temp. In this case, the setting temp. is not displayed in the Remote Controller and you are not able to control the room temp. either. . During the healthy dehumidification function, the air volume is automatically set according to the algorithm responding to the current room temp. and makes the room condition healthy and comfortable even in the high humidity season. NATURAL WIND BY THE CHAOS LOGIC . For more fresh feeling, press the Indoor Fan Speed Selector and set CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic. 1 2 3 14 Room Air Conditioner Operating Instructions Heating Operation(Heat pump model only) ON Cooling Healthy Dehumidification Auto Heating (Heat pump model only) To lower the temperature To raise the temperature Press the Start/Stop button. The unit will respond with beep sound. Open the door on the Remote Controller. To select Heating Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. NATURAL WIND BY THE CHAOS LOGIC . For more fresh feeling than other fan speed, press the Indoor Fan Speed Selector and set to CHAOS mode. In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic. 1 2 Set the temperature higher than the room temperature. The temperature can be set within a range of16°C~30°C(60°F~86°F) in 1°C(2°F). Set the fan speed again. You can select the fan speed in four steps–low, medium, high, or CHAOS. Each time the button is pressed, the fan speed mode is shifted. 3 4 Owner's Manual 15 Operating Instructions Jet Cool or or Press the Start/Stop button. The unit will respond with beep sound. Press the Jet Cool button to operate the speed cooling/heating mode and the unit will operate in super high fan speed on cooling/heating mode for 30/60 minutes. To cancel the Jet Cool mode, press the Jet Cool button or the fan button or the room temperature setting button again and the unit will operate in high fan speed in cooling/heating mode 1 2 3 . Jet Cool function in heating mode is available on Artcool type only. . During the JET COOL function at any moment, the A/C starts to blow th...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - DMC24DB-1 (2.83 mb)
Splitgeräte - DMH24DB-1 (2.83 mb)
Splitgeräte - DMH36TB-1 (2.83 mb)