Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
(Leakage, Current, Detection, Interruption) circuit breaker for added safety. If the power supply is interrupted, please press the reset button to reconnect the unit to the power source. The green light should be on. • Make sure the unit is connected to a correctly grounded power supply • For proper operation, the unit must be vented to the outside. • Do not cover or obstruct the appliance inlet or outlet grilles. • To avoid the risk of shock, the product should never be used in bathrooms, shower rooms or in any other steamy or wet areas. • Always transport the unit in an upright position. • Do not sit or stand on the unit. • Do not place objects on the unit. • Do not touch the unit with wet/damp hands or when standing barefoot. • Drainage of the water container is required before moving the unit or putting it into storage. • If the electric socket is different from the plug provided, have a professionally qualified electrician replace the outlet with a suitable one. Avoid the use of adaptor plugs, multiple sockets and/or extension cords; if their use is necessary ensure that they conform to the current safety regulations. • Do not pull the power cord or place it near a source of heat; always unroll it completely to avoid the possibility of dangerous overheating. • If the power cord is damaged, it must be replaced by a qualified person. THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE ABOVE INSTRUCTIONS ARE NOT FOLLOWED. 4 Operation Programming the timer for ON - when the unit is OFF. • Perform the standard steps as described above. The circular time scale will be on between the ON programmed times until 24:00.The flashing bar on the time scale indicates the real time and moves a segment ahead every 30 minutes until it reaches the ON timer time, then the black segments in the circular time scale will disappear. Programming the timer for OFF - when the unit is RUNNING. • Perform the standard steps as described above. The circular time scale will be on between the present time to the OFF programmed time. The flashing bar on the time scale indicates the real time and moves a segment ahead every 30 minutes until it reaches the OFF timer time, then the black segments in the circular timescale will disappear. Repeat OFF and ON Programming the timer for repeat OFF and ON - when the unit is RUNNING. • Perform the standard steps as described above. • Repeat the above procedure while the digits are still flashing for setting the ON. The circular time scale will be ON between 00:00 to the time set with the timer to OFF and from that time until 24:00. The flashing bar on the time scale indicates the real time and moves a segment ahead every 30 minutes.The unit will operate daily according to the timer setting. Repeat ON and OFF Programming the timer for repeat ON and OFF - when the unit is NOT RUNNING. • Perform the standard steps as described above. • Repeat the above procedure while the digits are still flashing for setting the OFF. The circular time scale will be OFF between 00:00 to the time set with the timer to ON and from that time until 24:00. The flashing bar on the time scale indicates the real time and moves a segment ahead every 30 minutes.The unit will operate daily according to the timer setting. After a power failure, or after the unit has been unplugged, you will have to program the timer settings again. Canceling the Timer Function In order to cancel the timer programming press the button momentarily, then it will return to the time display.The daily mode will be cancelled as well.The black segments in the circular time scale will disappear. 00:00 9 Thank You! Thank you for choosing the portable air conditioner from AMCOR, a leading brand in indoor air treatment. We would like you to enjoy the many benefits this unit offers, so please read this manual carefully and take full advantage of the many advanced features that your AMCOR Air Conditioner offers you. AMCOR has specialized in complete indoor environment control, manufacturing world-class air conditioners, dehumidifiers and air purifiers with innovative technology. In designing these advanced products, we have listened carefully to our customers and have passed their views on to our research and development laboratories. We wish you many years of enjoyable use. After reading this manual, please keep it in a safe place for future reference. Energy Saving Tips • Do not locate the air conditioner where furniture or other objects can obstruct the airflow. • Keep doors closed so cool air does not escape. • Keep the filters clean. Set the unit to maximum cooling and high speed fan initially, then adjust the unit to a comfortable setting. NOTE: Use the Temperature Control (UP/DOWN) to adjust Air Conditioner cooling to a desired level. 2 Drainage During the process of cooling, some water will be extracted from the air into the unit. Most of this water is used to cool the unit and make it run mor...