Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To enable or disable a device, do the following: 1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 71. 2. From the Setup Utility program main menu, select Devices. 3. Depending on the device you want to enable or disable, do one of the following: • Select USB Setup to enable or disable a USB device. • Select ATA Drive Setup to enable or disable an internal or external SATA device. 4. Select the desired settings and press Enter. 5. Press F10 to save changes and exit the Setup Utility program. See “Exiting the Setup Utility program” on page 76. Chapter 7. Using the Setup Utility program 73 Selecting a startup device If your computer does not start up from a device such as the disc or hard disk drive as expected, do one of the following to select the startup device you want. Selecting a temporary startup device Use this procedure to select a temporary startup device. Note: Not all discs and hard disk drives are bootable. 1. Turn off your computer. 2. Repeatedly press and release the F12 key when turning on the computer. When the Please select boot device window displays, release the F12 key. 3. Select the desired startup device and press Enter. The computer will start up from the device you selected. Note: Selecting a startup device from the Please select boot device window does not permanently change the startup sequence. Selecting or changing the startup device sequence To view or permanently change the configured startup device sequence, do the following: 1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 71. 2. From the Setup Utility program main menu, select Startup. 3. Select the devices for the Primary Startup Sequence, the Automatic Startup Sequence, and the Error Startup Sequence. Read the information displayed on the right side of the screen. 4. Press F10 to save changes and exit the Setup Utility program. See “Exiting the Setup Utility program” on page 76. Enabling ErP compliance mode You can enable the energy-related products directive (ErP) compliance mode through the Power menu in the Setup Utility program to reduce the consumption of electricity when your computer is in standby or off mode. To enable ErP compliance mode in the Setup Utility program, do the following: 1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 71. 2. From the Setup Utility program main menu, select Power . Enhanced Power Saving Mode, and press Enter. 3. Select Enabled and press Enter. 4. From the Power menu, select Automatic Power On and press Enter. 5. Select Wake on Lan and press Enter. 6. Select Disabled and press Enter. 7. Press F10 to save changes and exit the Setup Utility program. Press Enter when prompted to confirm the exit. Note: When ErP compliance mode is enabled, you can wake up your computer by doing one of the following: • Pressing the power switch • Enabling the wake up on alarm feature The wake up on alarm feature enables your computer to wake up at a set time. To enable the wake up on alarm feature, do the following: 74 ThinkStation User Guide 1. Start the Setup Utility program. 2. From the Setup Utility program main menu, select Power . Automatic Power On, and press Enter. 3. Select Wake Up on Alarm and press Enter. Then follow the instructions on the screen. 4. Press F10 to save changes and exit the Setup Utility program. Press Enter when prompted to confirm the exit. • Enabling the after power loss feature The after power loss feature enables your computer to wake up when the power supply resumes after a sudden loss of electricity. To enable the after power loss feature, do the following: 1. Start the Setup Utility program. 2. From the Setup Utility program main menu, select Power . After Power Loss, and press Enter. 3. Select Power On and press Enter. 4. Press F10 to save changes and exit the Setup Utility program. Press Enter when prompted to confirm the exit. ICE performance mode You can adjust the acoustic and thermal performance of your computer through the ICE Performance Mode menu. Two choices are available: • Better Acoustic Performance (default setting) • Better Thermal Performance By enabling Better Acoustic Performance, your computer will run with less noise at a normal thermal level. By enabling Better Thermal Performance, your computer will run at a better thermal level with normal acoustic performance. To configure the ICE performance mode, do the following: 1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 71. 2. From the Setup Utility program main menu, select Power. 3. Select Intelligent Cooling Engine (ICE). The Intelligent Cooling Engine (ICE) window is displayed. 4. Select ICE Performance Mode. The ICE Performance Mode window is displayed. 5. Select Better Acoustic Performance or Better Thermal Performance as desired. 6. Press F10 to save changes and exit the Setup Utility program. See “Exiting the Setup Utility program” on page 76. ICE thermal a...
Dieses Handbuch ist für folgende Modelle:PC Desktops - ThinkStation E31 (2552) (6.99 mb)
PC Desktops - ThinkStation E31 (2553) (6.99 mb)
PC Desktops - ThinkStation E31 (2554) (6.99 mb)
PC Desktops - ThinkStation E31 (2555) (6.99 mb)