Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Avoid using any wireless devices that exchange radio signals on the 2.4 GHz frequency band near the wireless mouse. These devices may cause interference, causing the mouse to stop working properly. Use surfaces such as plain paper, card stock, or fabric that have minimal repetitive patterns. Avoid surfaces such as mirrors, smooth glass, or magazines that have half- tone printing. Do not place metal furniture near your computer or wireless mouse, as this may create interference, causing the mouse to stop working properly. Do not mix old (used) and new batteries when replacing batteries in the wireless mouse. Always use the same type and manufacture of battery. Do not mix alkaline with manganese batteries. Using incompatible batteries or mixing used, new or different types of batteries can damage the wireless mouse. n 34 N Using Your VAIO Computer To connect the wireless mouse 1 Insert the supplied two AA batteries into the wireless mouse as shown below. 2 Turn on the computer. 3 Press the CONNECT button (1) on the back of the computer. n 355 N Using Your VAIO Computer Turn over the wireless mouse, slide the power switch to the ON position, and press the CONNECT button. Communication between the wireless mouse and the computer should now be established. ! Step 3 and 4 must be completed within 10 seconds of each other. . If the wireless mouse does not operate properly, the batteries may need to be replaced. If the wireless mouse is not being used for an extended period of time, remove the batteries to avoid possible damage from battery leakage. 3636n N Using Your VAIO Computer Adjusting the Mouse Functions 1 Click Start and then Control Panel. 2 Click Printers and Other Hardware. 3 Click Mouse. The Mouse Properties window appears. 4 Change the settings. 3737n N Using Your VAIO Computer Using the Built-in MOTION EYE Camera Your computer is equipped with a built-in MOTION EYE camera. The built-in MOTION EYE camera adds video functionality to instant messaging software and video editing software, for example Windows Messenger and Windows MovieMaker. Turning on the computer activates the built-in MOTION EYE camera, so the computer is ready for a video conference using such software. Note that launching or exiting your instant messaging or video editing software does not activate or deactivate the built-in MOTION EYE camera, respectively. Make sure that the camera is activated before using the software. n 38 N Using Your VAIO Computer . The built-in MOTION EYE camera cannot be shared by more than one software application. If another software application is using the camera, exit the application before using the built-in MOTION EYE camera. You can change the capture angle of the built-in MOTION EYE camera with the capture angle adjuster (1) on the back of your computer. Push down or up the horizontal bar to adjust the angle upward or downward, respectively, until you see the live feed in the desired angle. ! The viewer window may show some noises, for example horizontal streaks, if you view a rapid-moving object. This is normal and does not indicate a malfunction. n 39 N Using Your VAIO Computer Using the Optical Disc Drive Your computer is equipped with an optical disc drive. To insert a disc !B e sure to attach the 8cm disc adapter to an 8cm disc before inserting the disc into the optical disc drive slot. 1 Turn on the computer. 2 With the label side facing toward you, slide a disc into the optical disc drive slot. n 400 N Using Your VAIO Computer . In Standby or Hibernate mode, inserting a disc will automatically launch Windows and may display a window for selecting your preferred software program to launch or may automatically launch a preinstalled CD/DVD program. If you plan to use an external optical disc drive, connect the drive before you launch any preinstalled CD/DVD program. n 41 N Using Your VAIO Computer To remove a disc ! The drive eject button is disabled when your computer is turned off. Do not remove the optical disc when your computer is in a power saving mode (Standby or Hibernate). Doing so may cause the computer to malfunction. 1 Check that the optical disc drive indicator (1) is off. 2 Press the drive eject button (2). The optical disc slides out. . If pressing the drive eject button does not slide the disc out of the drive, restart your computer and repeat the procedure. n 422 N Using Your VAIO Computer Reading and Writing CDs and DVDs Your computer plays and records CDs and DVDs, depending on the model you purchased. Check your specifications for the type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive supports. 4343n N Using Your VAIO Computer PR: playable and recordable P: playable but not recordable –: not playable nor recordable CDROM Video CD Music CD CD Extra CD-R/ RW DVDROM DVD- Video DVD-R/ RW DVD+R/ RW DVD+R DL DVD-R DL DVDRAM DVD±RW/±R DL/RAM P P P P PR P P PR*1 *2 PR PR*5 PR*6 PR*3 *4 DVD±RW/+R DL/RAM P P P P PR...