Businesses and consumers are increasingly sensitive to even a minor deterioration in service quality. To maintain customer satisfaction and loyalty, your technology teams need tools that help identify potential problems and resolve faults quickly and effectively… They need an Agilent Technologies Signaling Advisor The Signaling Advisor provides detailed test and analysis capabilities for signaling on modern wireless and wire-line telephone networks such as SS7, Cellular, PCS, GSM and GPRS networ

The service representative’s responsibilities are limited to: • Unpacking the MSD system and verifying that all components are present and undamaged • Connecting the carrier gas line to the instrument from the tank, regulators, and lines previously installed by the customer • Installing, connecting, and turning on MSD system components • Verifying that the system meets Agilent Technologies performance standards • Providing basic user familiarization for system hardware and software • Signi

Always refer to Agilent Web site for the latest revision. © Agilent Technologies, Inc., 2006-2012 Sixth Edition, January 1, 2012 82357-90700 Agilent Technologies • • • • • *•••* •• • • *. Agilent82357B USB/GPIB^>£ 7i-X 9 - x£ — h-*VK Agilent Technologies © Agilent Technologies, Inc. 2006 - 2012 Agilent Technologies, Inc.l-^^^MW^Äi m!§^W{®!R£#Ü) !SM«C£li^t£ 7-i7A■ 82357-90700 № ®6№(2012#1fl1B) En0J:Tb-vT Agilent Technologies, Inc. 5301 Stevens Creek Blvd. Santa Clara, CA 95052

It calls attention to an operating procedure, practice, or the like that, if not correctly performed or adhered to, could result in damage to the product or loss of important data. Do not proceed beyond a CAUTION notice until the indicated conditions are fully understood and met. WARNING A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice, or the like that, if not correctly performed or adhered to, could result in personal injury or death. Do not proceed bey

b. Press the right/left arrow key to move the cursor on the input port number (01 to 14) that will be set to the input ground port. c. Press the up/down key to display G. 4. Change the ground-enabled input ports (multiple ports can be set). Repeat a and b for the all ground-enabled input ports, then press the Enter key. a. Press the right/left arrow key to move the cursor on the input port number (01 to 08) that will be set to the ground-enabled input port. b. Press the up/down key to display -.

9 Sets the channel configuration mode to Auto. 12 to 19 Defines the comments for the internal memory 1 to 8. Agilent B2200 User’s Guide, Edition 2 Programming Capacitance Compensation Capacitance Compensation When the capacitance/conductance measurement is performed through the Agilent B2200, LCR meter measures the capacitance/conductance of the path including a device under test (DUT), matrix switches, extension cables and so on. So, the data measured by the LCR meter is far from the DUT’s capa

In addition, with a standard offset range capability from 0.01 Hz to 100 MHz, the E5500 B-series provides the capability, flexibility, and versatility to meet changing and demanding needs placed upon the R&D engineer. By building upon 30 years of Agilent low phase noise, RF design and measurement experience, the E5500 series solutions continue to provide excellent measurement integrity, repeatability, and accuracy. The E5500 phase noise measurement solutions use the power of a flexible software

This series of solutions provides phase noise measurements of carrier frequencies from 50 kHz to 1.6 GHz, 6.0 GHz, 18 GHz, or 26.5 GHz over offset-from-carrier frequencies from 0.01 Hz to 100 MHz. A variety of signal generators— such as the 8662A, 8663A, 8643A, 8644B, 8664A/B, 8665A—can also be added to provide a low-noise reference signal. Phase Noise Measurement Software A graphical user interface provides measurement menus allowing the operator to specify the measurement process, including

E5504A: 50 kHz to 26.5 GHz Operating Characteristics Offset Frequency Range A Models: 0.01 Hz to 4 MHz B Models: 0.01 Hz to 100 MHz System Noise Response2: -180 dBc/Hz typically (>10 kHz offsets) System Spurious Response2: -120 dBc typically Phase Detector Input Power: (<1.6 GHz carrier frequency) R input = 0 to +23 dBm L input = +15 to +23 dBm Downconverter Input Range: 1 GHz to 6 GHz; 1 GHz to 18 GHz; 1.5 GHz to 26.5 GHz External Noise Input Port: 0.1 Hz to 100 MHz Measurement Accuracy: ±2

Should Agilent and the user have a separate written agreement with warranty terms covering the material in this document that conflict with these terms, the warranty terms in the separate agreement shall control. Technology Licenses The hardware and/or software described in this document are furnished under a license and may be used or copied only in accordance with the terms of such license. Restricted Rights Legend If software is for use in the performance of a U.S. Government prime contra