Should Agilent and the user have a separate written agreement with warranty terms covering the material in this document that conflict with these terms, the warranty terms in the separate agreement shall control. Technology Licenses The hardware and/or software described in this document are furnished under a license and may be used or copied only in accordance with the terms of such license. Restricted Rights Legend If software is for use in the performance of a U.S. Government prime contra
This series of solutions provides phase noise measurements of carrier frequencies from 50 kHz to 1.6 GHz, 6.0 GHz, 18 GHz, or 26.5 GHz over offset-from-carrier frequencies from 0.01 Hz to 100 MHz. A variety of signal generators— such as the 8662A, 8663A, 8643A, 8644B, 8664A/B, 8665A—can also be added to provide a low-noise reference signal. Phase Noise Measurement Software A graphical user interface provides measurement menus allowing the operator to specify the measurement process, including
In addition, with a standard offset range capability from 0.01 Hz to 100 MHz, the E5500 B-series provides the capability, flexibility, and versatility to meet changing and demanding needs placed upon the R&D engineer. By building upon 30 years of Agilent low phase noise, RF design and measurement experience, the E5500 series solutions continue to provide excellent measurement integrity, repeatability, and accuracy. The E5500 phase noise measurement solutions use the power of a flexible software
E5504A: 50 kHz to 26.5 GHz Operating Characteristics Offset Frequency Range A Models: 0.01 Hz to 4 MHz B Models: 0.01 Hz to 100 MHz System Noise Response2: -180 dBc/Hz typically (>10 kHz offsets) System Spurious Response2: -120 dBc typically Phase Detector Input Power: (<1.6 GHz carrier frequency) R input = 0 to +23 dBm L input = +15 to +23 dBm Downconverter Input Range: 1 GHz to 6 GHz; 1 GHz to 18 GHz; 1.5 GHz to 26.5 GHz External Noise Input Port: 0.1 Hz to 100 MHz Measurement Accuracy: ±2
The kit contains a one-to-one quantity of thermal transfer ribbon and labels so that you can replace them at the same time. The kit also contains a pen for cleaning the printhead. If you are replacing used ribbon and labels, see the G5404B Microplate Labeler User Guide for the cleaning procedure before you continue. Open the printer cover to gain access for loading the labels and ribbon. Loading the ribbon Slide the new ribbon roll onto the hub until it is flush against the printer. Ensure th
4 Product Warranty....................................................................................... 5 Limitation of Warranty...................................................................................5 Exclusive Remedies....................................................................................................5 Assistance..........................................................................................................5 Introduction...................................
LIMITED WARRANTY STATEMENT AGILENT PRODUCT DURATION OF LIMITED WARRANTY HSSI WanProbe 1 year Agilent warrants to you, the end-user customer, that Agilent hardware, accessories and supplies will be free from defects in materials and workmanship after the date of purchase, for the period specified above. If Agilent receives notice of such defects during the warranty period, Agilent will, at its option, either repair or replace products which prove to be defective. Replacement products may be eithe
The source has several sharp pieces which can pierce your skin including the APCI corona needle, vaporizer sensor and counter current electrode. 1 If the source to be installed is an APPI source, disconnect the multimode high voltage PCA RS-232 serial cable from the serial port B connector of Smart Card. 2 Unscrew and remove the multimode spray shield with the field shaping electrodes. 3 Install the new source and the standard spray shield, making sure that the hole in the spray shield is in
Always refer to Agilent Web site for the latest revision. © Agilent Technologies, Inc., 2006-2012 Sixth Edition, January 1, 2012 82357-90700 Agilent Technologies • • • • • *•••* •• • • *. Agilent82357B USB/GPIB^>£ 7i-X 9 - x£ — h-*VK Agilent Technologies © Agilent Technologies, Inc. 2006 - 2012 Agilent Technologies, Inc.l-^^^MW^Äi m!§^W{®!R£#Ü) !SM«C£li^t£ 7-i7A■ 82357-90700 № ®6№(2012#1fl1B) En0J:Tb-vT Agilent Technologies, Inc. 5301 Stevens Creek Blvd. Santa Clara, CA 95052