Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Capresso Dateigröße: 151.31 kb Dateiname: Unterrichtssprache:

If the coffeemaker was set to AUTO no coffee will be ground and the filter will still sit underneath the grinder. If the machine was brewing coffee before the power interruption, it will not continue brewing. If power comes on again the display will show TIME. You must set the time again (Chapter 7.2a). Please note: Your personal grinding settings and the Auto-on time are still maintained. 7.4 Filling the Beans Fill the bean container (Fig. 1,B) with beans. Make sure that the water container lid is closed to prevent beans from spilling into the water container. Caution: Check beans for foreign objects (see page 4, chapter 2e). The bean container will hold approximately 90 grams of beans (good for almost two full pots of coffee). Select the fineness setting (Fig. 3) by turning the bean container until the line matches up with one of the four dots in front of the bean container. For first time use, we recommend the coarsest setting – the largest dot. Note: Never fill the bean container with frozen or coated beans (see chapters 2a and 2d, page 4). 7.5 Filling The Water Container Open the water container lid (Fig. 1,E) and fill the water container with the desired amount of fresh, cold water. Please note: Never fill water above the "MAX" line on the water container. 7.6 Filter Holder Insert Caution: If the filter holder insert (Fig. 4) is not completely locked into the filter holder, the drip stop on the bottom of the filter holder insert might not open during brewing. This can cause hot coffee to overflow and can result in serious injuries and damages. Here is how to properly lock the filter holder insert into the filter holder: • Open the water container lid (Fig. 1,E). • Remove the cover lid (Fig. 5). • Remove the carafe from the pedestal and then lower the filter holder insert with the tab of the filter holder insert pointing towards the water container. Push the handle of the filter holder insert down towards the water container and make sure it sits completely flush with the rim of the filter holder (Fig. 4). • Push with your finger against the drip stop (Fig.6). If the filter holder insert is in the proper position, it will stay inside the filter holder and not move upwards. • Insert the GoldTone Filter (Fig. 1,G). • Place the Cover lid on top of the filter holder insert. Make sure it sits flush inside the rim of the filter holder (Fig. 5). CAUTION: Messy / Dangerous! If you forget to place the filter holder insert in the filter holder and you slide the filter holder underneath the grinder, it will start grinding and spread the ground coffee on your counter. It will then return the filter holder underneath the water container lid and the brewing process will start, splashing hot water everywhere. In this case, immediately push the On/Off button to turn off the machine and wait until the water pumping stops! Always move the filter holder WITH the filter holder insert AND the GoldTone filter underneath the grinder. 10. 7.7 Cover Lid (Fig. 5) The cover lid minimizes static coffee particles clinging to the outside of the filter holder. We recommend using this lid when you grind for six or more cups of coffee. • Cleaning: Wipe the lid clean after each use. Do not clean in dishwasher! Note: The lid has two parts: a soft, removable collar and a hard disk. If you accidentally remove the soft collar, just replace it in its original position (with the high rim pointing upwards). 7.8 Using the Stainless Steel Carafe For best coffee temperature pre-warm the carafe by rinsing it with hot water. Always make sure carafe is completely empty. Place the lid on top of the carafe and rotate one full turn clockwise until closed (see Fig. 7). Do not tighten too much. Place the carafe on the pedestal. Caution: Make sure the lid is not in the pouring position (Fig. 8). Attention: The lid must always be on the carafe and closed (Fig. 7) during brewing to activate the drip stop. If you lose the lid, you cannot brew coffee. Use the enclosed mail order form or call 1-800-767-3554 to order a new lid. Please note: Always make sure that the carafe is transported in an upright position. If you turn the carafe with its lid closed on its side or turn it upside down, hot coffee will flow into the grooves of the lid and exit through the side of the lid (Fig. 9). Important: A stainless steel bottom with three black feet covers the vacuum seal of the stainless steel body. Do not try to remove this lid. Do not place the carafe on any hot surfaces since this can loosen the vacuum seal inside the bottom. This can cause the carafe to lose its warm keeping function. Do not place carafe in dishwasher. 8. Grinding and Brewing Coffee Now • Select cup and strength setting page 9, chapter 7.2,d). • Fill beans into the bean container (page 10, chapter 7.4). • Fill the desired amount of water into the water tank. • Make sure the filter holder insert, GoldTone filter (or paper filter) and cover lid are in place (page 10, chapter 7.6). Using Filter Pa...

Herunterladen

Geben Sie zwei Ziffern: