Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Capresso Dateigröße: 151.31 kb Dateiname: coffeeteam_therm_instructions.pdf Unterrichtssprache:

11a. Decalcifying with DURGOL Capresso recommends DURGOL for drip coffee makers. Durgol removes any calcium deposit up to 20 times faster than vinegar. Durgol is available through 1. Remove Goldtone Filter. 2. Fill water container with 18 oz. of cold water and add 6 oz. Durgol. 3. Important: Make sure the filter holder is in place and the Stainless Steel Carafe is empty. 4. Place the carafe with the lid closed on the pedestal. 5. Turn the machine on. 6. When the solution has run through, remove the carafe, empty and rinse thoroughly. Important: let the machine cool down for 5 minutes. 7. Fill 20 oz. of fresh cold water into the water tank and brew through the machine. 11b. Using other Decalcifying Agents Only use decalcifying agents suitable for drip coffee makers and follow the instructions which come with the agent. 12. FAQ (Technical Questions) Q1. I accidentally locked the filter holder underneath the grinder. What do I do? A. Push the manual filter holder release button (Fig. 14). Q2. There is no coffee coming out of the grinder. It seems as though the coffee is completely clogged inside the grinder. What do I do? A. Please follow the steps outlined in chapter 10f, page 13. Q3. Can the grinder run without beans in the bean container? A. Yes. Q4. Can I have different grinding settings for the current and the programmed mode? A. Yes! See chapter 7.2,d and e, page 9. 14. Q5. How long does the machine keep the grinding and brewing settings? A. See chapter 7.3 page 9. The programmed setting is activated only when you push the "A" button (Fig. 1,M) and the green auto light turns on. Q6. How do I know if the display shows the current or the programmed setting? A. In the program mode the A button is illuminated green. Q7. Can I change any settings while the grinder is running? A. No. The red On/Off light or the green Auto light have to be off to change the grinder settings. Q8. What happens if the filter holder does not return underneath the water container lid after grinding? A. After the grinding process is completed, the swing-back mechanism will try to return the filter holder. If it does not swing back sufficiently, the machine will automatically turn itself off to prevent the coffee maker from brewing. Q9. What happens if the water container lid is open during the brewing process? A. The hot water will splash in spurts and be guided back into the water container. Immediately close the water container lid. Q10. Beans spilled into the water container. What do I do? A. Unplug the machine, remove the carafe, empty the bean container (as well as you can), remove the filter holder insert and GoldTone filter, open the water container lid and turn the machine upside down over a sink. Reset the time. Q11. What happens in the auto setting (green light is on) if I forget to push the filter holder underneath the grinder? A. You will get hot water. At the pre-programmed time, the green light will turn off and the red light will turn on. If the filter holder is still underneath the water container lid, the machine assumes you want to brew coffee only (without grinding). Since there is no coffee in the filter holder, the carafe will be filled with hot water. 13. FAQ (Coffee Questions) Q1. How much coffee should I use? A. The grinder grinds approximately between 6 seconds (setting “4, mild”) and 30 seconds (setting “10, strong”). The maximum amount of coffee will be ground in the setting “10, strong” with the fineness selector in the coarsest position. EXAMPLE: for 10 cups of coffee: Fill the water container with the maximum amount of water. Set the grinder to 10 cups, the strength indicator to mild, and the fineness selector to fine. • IF THE COFFEE IS TOO STRONG: change the grind amount indicator to 8, the strength indicator to medium, and continue to use the same amount of water. • IF THE COFFEE IS NOT STRONG ENOUGH: leave the grind amount indicator at 10, change the strength indicator to strong, and set the fineness selector in the coarsest position (largest dot). If the coffee is still not strong enough, use a little less water. Q2. I want a full pot of coffee at 8:00 AM. What time should I program the grinder to start? A. Set the timer 15 minutes earlier (in this case at 7:45 AM). Q3. Can I grind “espresso beans” for my espresso machine? A. Before final assembly we manually calibrate each pair of burr grinders (testing with beans!) to prevent clogging while grinding, 15. regardless which type of bean you use. The actual grinding, however, is designed to work well with drip coffee brewing. As a result, the grind might not be suitable for your espresso machine. Q4. The grinder makes a loud noise? No coffee is processed. A. A stone blocks the grinder. Please call 1-800-767-3554. 14. One Year Limited Warranty This limited warranty covers your new Capresso CoffeeTEAM Therm, model #455. This warranty is in effect for the period and usage described above from the date of the first purchase and is limite...

Herunterladen

Geben Sie zwei Ziffern: