If damage is suspected, return the appliance to the nearest Sunbeam Appointed Service Centre for examination, repair or adjustment. • For additional protection, Sunbeam recommend the use of a residual current device (RCD) with a tripping current not exceeding 30mA in the electrical circuit supplying power to your appliances. • Do not immerse the appliance in water or any other liquid unless recommended. If you have any concerns regarding the performance and use of your appliance, please ring our

Storage container The storage container is ideal for storing excess coffee grounds. Cleaning brush For easy cleaning use the small brush to remove stubborn coffee grinds quickly and with no fuss to ensure quality, fresh grinding results every time. POWERCOARSE/ PERCOLATORMEDIUM/ DRIPFINE/ ESPRESSO481215481215481215 Style of coffee grind The AutoGrinder gives you 3 choices of grind; coarse for percolated coffee, medium for drip filtered coffee and fine for espresso coffee. Sliding grind selector

• Do not immerse the appliance in water or any other liquid unless recommended. If you have any concerns regarding the performance and use of your appliance, please visit or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. Features of your AutoGrinder TransparentcoverForeaseofusethecoveroftheAutoGrinderalsodoublesasameasuringcupandbeingtransparenttheuserisabletoobservethecoffeebeansbeingground. StainlesssteelgrindingbowlAscoffeebeansareoilyandaromati

9. Remove the lid to the grinding bowl and fill bowl with 3 to 4 scoops of coffee beans. Replace the lid. 10.Set the grind fineness selector to number ‘4’, this is to ensure that the upper burr grinding wheel is moving properly. 11.Turn the power switch on the Sunbeam Burr Grinder to ‘ON’. 12.Push the ‘GRIND’ button for 2 seconds and release. Note: Your Sunbeam Burr Grinder is now prepared to be used on a regular basis. Grinding 1. Place the Sunbeam Burr Grinder on a dry, level surface. 2. Check

Sunbeam’s Safety Precautions SAFETY PRECAUSTIONS FOR YOUR SUNBEAM COFFEE GRINDER • Check the grinding bowl for the presence of foreign objects before using. • Always operate the grinder with the ground coffee container properly inserted in the grinder. • Do not place your hand in or near the burrs while the grinder is in operation. • Always place the unit on a flat, level surface. • Switch off and unplug at power point before cleaning. • Do not attempt to re-grind ground coffee. Sunbeam are very

Coffee too coarse. Grind the coffee to a finer texture or change brands of espresso coffee to a finer grind. Espresso does not have any Not enough coffee in filter. See "Preparing an espresso" Crema. p14. Handle comes off during brewing. Coffee tamped too hard. Tamp the coffee grounds lighter. Coffee grind is too fine. Change to a coarser grind of coffee. Filter handle is not attached correctly, Ensure the handle is firmly positioned or has not been tightened sufficiently. onto the brewing head.