Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Kalorik Dateigröße: 426.12 kb Dateiname: Ccg19322IB.pdf Unterrichtssprache:

To reduce the risk of electric shock, this plug will fit into the polarized outlet only one way. If the plug does not properly fit into the outlet at first, reverse it. If it still does not fit, contact a competent qualified electrician. Do not attempt to modify the plug in any way. For appliances equipped with a standard plug, simply insert the plug into the outlet without paying attention to the way you plug it. SHORT CORD INSTRUCTIONS A short power supply cord is provided to reduce the hazards resulting from becoming entangled in, or tripping over a longer cord. Extension cords may be used if care is exercised in their use. • The electrical rating of the extension cord should be at least that of the appliance. If the electrical rating of the extension cord is too low, it could overheat and burn. • The resulting extended cord should be arranged so that it will not drape over the counter top or tabletop where it can be pulled on by children or tripped over. PART DESCRIPTION Text Box: 8 1. Glass jug 2. Jug handle 3. Jug lid 4. Filter holder 5. Handle of the filter 6. Permanent filter 7. Lid of the filter holder 8. Control panel 9. Coffee grinder 10. Water tank lid 11. Water tank 12. Water level indicator 13. Base 14. Hot plate BEFORE FIRST USE When you use your appliance for the first time, pour fresh water into the water tank (without coffee), press the GRIND OFF button and switch on the appliance. Once all the water has passed through, switch off the appliance and let it cool down. When it is cold enough repeat the process 3 times with fresh water. SETTING THE CLOCK • Plug in your coffee maker. The time "12:00" will be displayed on the electronic digital clock. • To set the current time, press the PROG button once and ‘CLOCK’ will be displayed. Then press the HOUR button to set the hours, and the MIN button to change the minutes. • Every time you press one of those buttons, the hour or minutes will increase by 1 unit but if you hold them, the time will roll forward more quickly. • When the setting is finished, wait about 15 seconds or press PROG until CLOCK disappears from the display. USING THE COFFEE GRINDER NOTE: Before each use of the coffee grinder, slide the device allowing the freshly ground coffee to fall directly inside the permanent filter from to . Open the lid of the water tank. Remove the lid from the coffee grinder and take the coffee grinder out. Fill it with the desired amount of coffee beans, depending on the quantity of cups you want to brew. There are 3 marks inside the coffee beans container indicating the quantity to use to prepare 4, 8 or 10 cups. Do not overfill the coffee grinder. If you want to grind coffee to prepare only 1 to 4 cups of coffee, press the 1-4 cup button. It will reduce the time of grinding coffee to 20 seconds instead of 30 seconds for 5 to 10 cups (default setting). NOTE: you cannot select the 1-4 cup setting if you have switch off the coffee grinder by pressing the GRIND OFF button. Place the coffee grinder correctly on its shaft. Close the lid of the coffee grinder, making sure the lugs of the lid insert in the slots of the appliance. The lug should end up in front of the symbol located on the appliance. The brewing will start immediately after the grinding of the coffee. Therefore, make sure you proceed as indicated in the “MANUAL OPERATION” section, or the “PROGRAMMING THE COFFEE MAKER” section of this user manual. HINT: when the lid of the water tank and coffee grinder is left open, beeps will sound and “OPEN” will be displayed on the screen to remind you that the appliance cannot work with the lid open. We therefore advise you to fill the water tank and the coffee grinder before plugging in the appliance. MANUAL OPERATION • Slide the release / open button of the lid of the water tank and lift the lid open. Fill the water tank with cold water. The number of cups can be read on the graduated water tank. Close the lid. • Pull the filter holder out using its handle, fill the permanent filter with the desired quantity of ground coffee or use the grinder (see “USING THE COFFEE GRINDER” section). Then replace the filter holder in its initial position. NOTE: If you do not want to use the grinder and decide to fill the filter with normal ground coffee, press the GRIND OFF button, the orange pilot light will come on. NOTE: You cannot switch this “GRIND OFF” function on or off if the on/off light (Red), or the timer light (Green) are already lighted. • Make sure the jug is placed correctly on the hotplate. • To switch on your appliance, press once the ON/OFF switch. The red pilot light will come on and the coffee will start flowing after a few seconds. When you remove the jug from the appliance, a non-drip valve will automatically operate to stop any drops of coffee dripping onto the hotplate. Replacement of the jug automatically opens the non-drip valve and allows remaining coffee to filter trough into the jug. • Once the water tank is empty, we advise you to wait un...

Herunterladen

Geben Sie zwei Ziffern: