Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Refer to Figures 5 and 6. *g. Connect the switch wires to the ON/OFF switch. Press the ON/OFF switch down into the switch mounting bracket on door frame until it locks in place (see Figure 8). Door Clip In Place Between Doorframe And Glass Door Figure 6 - MPLDV Models 7. Remove the left and right side Style View doors from packaging. Install them by aligning hinge pins on the doors with the hinge holes on the doorframe and slide down (see Figure 9 ). Ensure the hinge pins are fully seated onto the shoulders of the hinge holes. Note: For MPLDV 30” models, remove single piece facade panel and mount the four pins into the hinge shoulders. Insert Hinge Pins Into Hinge Holes as Shown Hinge Pin Door Figure 7 - Doorframe Installed Figure 9 ONOFF ON/OFF Switch 8. Close Doors (see Figure 10). ONOFF ON/OFF Switch Original Location ON/OFF switch installed on doorframe bracket ON/OFF Switch New Location Figure 10 - Completed Installation Figure 8 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and the discontinuance of colors, styles and products. Consult your local distributor for fireplace code information. Printed in U.S.A. © LENNOX HEARTH PRODUCTS 2006 P/N 750,215M REV. B 08/2007 1110 West Taft Avenue Orange, CA 92865 ...
Dieses Handbuch ist für folgende Modelle:Kamine - Merit Plus Series APDL35C (1.67 mb)
Kamine - Merit Plus Series APDL35SP (1.67 mb)
Kamine - Merit Plus Series APDL40C (1.67 mb)
Kamine - Merit Plus Series APDL40SP (1.67 mb)