Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Lennox Hearth Dateigröße: 1.67 mb Dateiname: Unterrichtssprache:

Install as follows: *a. Position switch wires in front, inside of control compartment (so they can easily be reached after doorframe is in position). b.Position the bottom of the doorframe so that the bracket on the inside of the doorframe locks behind the cabinet bottom flange as shown in Figure 4. *c. Feed the switch wires through the switch mounting bracket on doorframe as shown in Figure 3. Retain the lower panel for future use in case the Style View Door Kit is ever removed. Wires for ON/OFF switch Switch Mounting Bracket on Doorframe Remove this lower panel by lifting it up and out. Figure 1 Figure 3 Tabs engage into slots (both sides) Hook Doorframe Over Glass door Slot Tab Fireplace Doorframe Locate the doorframe bracket on the lower front of the doorframe and lock it behind the cabinet bottom flange as shown here. Doorframe Bracket Figure 5 - MPLDV Models Detail Showing Glass Door Clip Being Put Into Place Between Doorframe And Glass Door Locate slot on each side Figure 4 - ELDV Models d. ELDV Models - Locate slots on each side of fireplace (see Figure 4). e. ELDV Models - Hold the top of the door frame slightly away from the fireplace front while aligning the tabs on door frame with the corresponding slots on fireplace. While the tabs engage, slide the top of the door frame so that it goes over the top of glass door assembly (see Figures 4 & 7). f. MPLDV Models - Locate the top of the door frame and identify the return flange. Position the door frame in front of the glass door assembly and hook the door frame over it at the top. Let the door frame fall into place. Position the door frame right to left and use the clips to engage the door frame and glass door assembly, to lock it (lower left and right corners of the opening). The clip will slide between the metal frame of the glass door assembly and the glass. Refer to Figures 5 and 6. *g. Connect the switch wires to the ON/OFF switch. Press the ON/OFF switch down into the switch mounting bracket on door frame until it locks in place (see Figure 8). Door Clip In Place Between Doorframe And Glass Door Figure 6 - MPLDV Models 7. Remove the left and right side Style View doors from packaging. Install them by aligning hinge pins on the doors with the hinge holes on the doorframe and slide down (see Figure 9 ). Ensure the hinge pins are fully seated onto the shoulders of the hinge holes. Note: For MPLDV 30” models, remove single piece facade panel and mount the four pins into the hinge shoulders. Insert Hinge Pins Into Hinge Holes as Shown Hinge Pin Door Figure 7 - Doorframe Installed Figure 9 ONOFF ON/OFF Switch 8. Close Doors (see Figure 10). ONOFF ON/OFF Switch Original Location ON/OFF switch installed on doorframe bracket ON/OFF Switch New Location Figure 10 - Completed Installation Figure 8 NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. Lennox Hearth Products reserves the right to make changes at any time, without notice, in design, materials, specifications, prices and the discontinua...

Herunterladen

Geben Sie zwei Ziffern: