Previous last SCSI device may need to be “un-terminated”. Find this flat cable! SCSI Cable 68 Pin*/ 50 Pin Width *Adapter required (not included) c IDE Cable 40 Pin Width 34 Pin Width Floppy Disk Drive Cable l If CD-RW drive is not on end of SCSI cable or last physical device, remove the “ Active Term” jumper and assure the last physical SCSI device is properly terminated or activated. Note: Note: Only the last physical SCSI device needs to be terminated. There may already be internal or externa

(Fig. 1) 4. Remove the used ribbon. 5. Install the new ribbon. 6. With the black side of the ribbon facing upwards, place one of the reels on the reel shaft on the right. (Fig. 2) Make sure that the reel is securely in place. 7. Thread the ribbon around the outside of the metal guides. (Fig. 3) 8. Take up any slack by manually turning one of the reels. 9. Replace the printer cover. 10. Replace the paper roll. Printer cover Ink ribbon Fig. 1 Fig. 2 Reel Ink ribbon Reel shaft Fig. 3 – 7 – PAPER RO

— ^ — —0 100.55 © 200 g) (2 400.55 g] 500.65 \±\ ® 100.55 A 300.55 A 500.55 A 901.10 A 1.401.75 A 1.401.75 A 100 55 + 200-00 + 20000 + 400-55 + 500-65 + 005 1«401-75 * (a) (b) GRAND TOTAL CALCULATION EXAMPLE: 100 + 200 + 300 = © +) 300 + 400 + 500 = © +) 500-600 + 700 = ® Grand total @ (1) (2) (3) w -I — F @® — 6 — 5 100 g] 100. A 100- + — 4 -3 200 ffl 300. A 200- + -2 300 (2 600. A 300- + -0 ® 600.2 600- *+ 0 GT • -□ 300 (S 300. S 300- + 400 {*} 700.2 400- +

Entry of more than 12 digits or 11 decimals. This error can be cleared with the |c§ or 0 key. 2. When the integer portion of an answer exceeds 12 digits. 3. When the integer portion of the contents of the memory exceeds 12 digits. (only CS-2850) {Ex. @ 999999999999 0 10) 4. When any number is divided by zero, (Ex. 5 | 0 | ) DECIMAL SYSTEM Input override decimal feature The calculator operates on a principle of floating decimal entries with preset decimal answers. 1. An entry may contain

. ITEM COUNT CALCULATION Bill No. Number of bills Amount 1 1 $100.55 2 1 $200.00 3 1 $200,00 4 1 $400,55 5 1 $500,65 Total (a) (b) 18 (1) (2) (item w counter) (4) rn — F s — 6 — 5 100.55 [T] 100.55 001 100-55 + — A 200 g] 300.55 002 200-00 + s - 2 а 500.55 003 200-00 + — 1 -0 400.55 {*] 901.10 004 400-55 + 500.65 [f] 1,401.75 005 50065 + K>: ! • IC+ 1 1 й 005 (a) L Ш 1,401.75 1.401 75 * (b) GRAND TOTAL 100 + 200 + 300 =© +) 300 + 400 + 500 -© +) 500-600 + 70

Set to the print mode. (“• • • ... • • • +” will be printed.) “P•IC”: Power ON. Set to the print and item count mode. The counter will count the number of times that has been pressed in addition. Notes: • Each time is used in subtraction, 1 will be subtracted from the count. • The count is printed when the calculated result is obtained. • Pressing of , or clears the counter. • The counter has a maximum capacity of 3 digits (up to ±999). If the count exceeds the maximum, the counter will recount

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy avai

• Guarde las pilas donde no puedan alcanzarlas los ninos. REPLACEMENT OF BATTERY FOR MEMORY PROTECTION Time for battery replacement Life of the memory protection battery is approximately 2,500 hours at 25°C(77°F) with the power plug not connected to the socket. * When the memory protection battery is weak, the date/time setting is initialised (1/1/2005, 12:00:00 a.m.). Verify the date/time setting in the date/clock display mode when connecting the power plug to the socket. If the date/time setti

2. The constant/add mode selector and grand total/rate setting mode selector should be in the “•” position (off) unless otherwise specified. 3. The print/item count mode selector should be in the “P” position unless otherwise specified. 4. If an error is made while entering a number, press or and enter the correct number. 5. Negative values are printed with ‘‘–’’ symbol in red. EL-1197PIII (U1U)-2. MIXED CALCULATION/CALCULOS MIXTOS (240 + 180 + 180 – 75) . 8 = 240 240. 240• + 180 420. 180• + 600

Eingabe Loschen – Bei Betatigung nach Eingabe einer Zahl und vor Eingabe einer Funktion wird die Zahl geloscht. AUSSCHALTTASTE: Durch Drucken dieser Taste wird der Rechner abgeschaltet. DRUCKTASTE: Sogar in der Non-Print-Betriebsart kann die angezeigte Zahl ausgedruckt und auf diese Weise der Ausdruck auf das wesentliche beschrankt werden. Durch Drucken der Taste unmittelbar nach der Eingabe einer Zahl wird die Eingabe mit dem Symbol # ausgedruckt. Durch Drucken von wird ein Trennzeichen in eine