Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
The menu will clear automatically after a few seconds or you can press the ON/ CLEAR key to clear the screen. ASP (Advanced Signal Processing) ASP is a program embedded in the Supra I.D.’s computer that is specifically designed to eliminate noise. It continually monitors the signals from the receiver, determines which echoes are noise and rejects them. This allows true target echoes to display on the screen with a minimum of clutter. This feature is especially useful since it typically lets you operate the boat at all speeds without adjusting the sensitivity or other controls. When the Supra I.D. is first turned on, ASP is enabled. To turn ASP off, press the menu key repeatedlyuntilthe ASP menu appears. Now press the up arrow to turn it on or the down arrow to turn it off. The menu will clear automatically after a few seconds or you can press the ON/ CLEAR key to clear the screen. 37.3 ft DARK LIGHT I 14 LAMP The Supra I.D. and Supra I.D. Plus’ display is backlighted for night use. To turn the backlights on or off, press the menu key repeatedly until the LAMP menu appears. Now press the up arrow to turn the lights on orthe down arrow to turn them off. The menu will clear automatically after a few seconds or you can press the ON/CLEAR key to clear the screen. 37.3 LAMP OH P FEET/METER The Supra I.D. can show the depth in feet or meters. When the unit is in the metric mode, all depth readings, ranges, zooms, and alarm settings are in meters. When a unit is in the feet mode, all of the above settings are in feet. To change from feet to meters or vice-versa, press the menu key until the FEET/METER menu appears. Press the down arrow key to switch to metric, the up arrow to switch to feet. Displays show in feet when the unit is first turned on. The menu will clear automatically after a few seconds or you can press the ON/CLEAR key to clear the screen. 37.3 FT «<£ DISPLAY CONTRAST The unit’s display contrast is adjustable to suit different lighting conditions. This will help you see the screen from different angles, or at various times of the day. To~adjust the contrast"presslhe menu key until the DARK/LIGHT menu appears. To decrease it, press the down arrow key. Press the up arrow key to increase the contrast. The bar graph in the Dark/Light menu box shows a graph of the contrast. The screen will also show the effects of 13 37.3 FT DISPLAY MODE The Supra I.D. has three different screen modes. To change modes, press the MENU key until the “DISP MODE” (Display Mode) menu appears. Then press the up or down arrow keys until the desired mode number appears. The modes are as follows: CHT1 (Chart #1) This is the default mode used when the Supra I.D. is first turned on. It has the following features: 1. Automatic On 2. Fish ID Feature On 3. Digital Depth Display On DISP MODE CHT 2 (Chart #2) This is the High Speed Scroll mode. It shifts the chart speed into high gear, scrolling echoes at a high rate. It has the following features: 1. Automatic Off 2. Fish ID Feature Off - 3. Digital Depth Display Off 10 DIG 1 (Digital #1) This is the digital only screen. It shows the digital depth display at the top of the screen in very large numbers. The shallow and deep alarm settings are displayed beneath the digital depth. No chart shows on this screen. DEPTH FT 60.8 SHAL ALM QFT DEEP ALM 0FT ALARMS FISH ALARM The Fish Alarm sounds a tone when a fish symbol appears on the screen. To use the fish alarm, press the menu key until the “FISH ALARM” menu appears on the screen. Now press the up arrow key to turn the alarm on. Repeat the above steps to turn the fish alarm off. (Note: If the Fish ID feature is off, it will be turned on when you turn the fish alarm on.) 37.3FT FISH ALARM OH B DEPTH ALARMS The depth alarms are triggered only by the bottom signal. No other echoes will activate these alarms. The depth alarms consist of a shallow and deep alarm. The shallow alarm sounds an alarm tone when the bottom goes shallower than the alarm’s setting. The deep alarm sounds a tone when the bottom goes deeper than it’s setting. Both alarms adjust the same, although through different menus. 11 Shallow Alarm To set the shallow alarm, press the menu key repeatedly until the “SHAL ALARM” menu appears as shown below left. Press the down arrow key to increase the depth, the up arrow key decreases it. The number ¡n the shallow alarm’s menu box shows the current shallow alarm setting. When the number reaches the desired setting, release the arrow key. Press the ON/CLEAR key to remove the shallow alarm menu from the screen. Now when the bottom depth goes shallower than the alarm’s setting an alarm tone sounds. At the same time the alarm sounds, a message box appears on the screen as shown below right. 37.3 rT SHAL ALARM 37-3FT SHAL ALARM MUTE Press the up arrow key to silence the alarm. This will turn the alarm sound off until the shallow alarm is triggered again. To turn the alarm off, press t...