Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
-Make sure the socket is live when you charge the epilator.The electricity supply to sockets in mirror cabinets over washbasins or shaver sockets in bathrooms may be cut off when the light is switched off. -Do not look directly into the Opti-light of the epilator to avoid being dazzled by the light. -Only use the Smar t Tweezers on alkaline button batteries type L736H or AG3 (dia. 7.8 x 3.4mm). -Only use disposable non-rechargeable AA 1.5V alkaline batteries in the precision epilator. -Do not let metal objects come into contact with the batter y terminals of the precision epilator and do not shor t-circuit the disposable batteries. -Do not use the epilating head of the epilator without one of the epilation caps. -Fully charge the epilator ever y 3 to 4 months, even if you do not use the epilator for a longer time. EnglisH 7 EnglisH Compliance with standards This Philips epilator and precision epilator comply with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the epilator and precision epilator are safe to use based on scientific evidence available today. general -This symbol means that the epilator and precision epilator are suitable for use in a bath or shower. -For safety reasons, the epilator can only be operated cordlessly. -The adapter is equipped with an automatic voltage selector and is suitable for mains voltages ranging from 100 to 240 volts (50 -60 Hz). -Maximum noise level of the epilator : Lc = 76dB(A) -Maximum noise level of the precision epilator : Lc = 77dB(A) Preparing for use Charging -Charging the epilator takes approx. 1 hour. When the epilator is fully charged, it has a cordless operating time of up to 40 minutes. 1 Connect the small plug to the appliance (1) and the mains plug to the wall socket (2). The charging light pulsates white to indicate that the appliance is , charging.When the batteries are fully charged, the charging light lights up white continuously for 20 minutes and then goes out. EnglisH Batteries low or empty -When the batteries are almost empty, the charging light star ts to flash red. When this happens, the batteries still contain enough energy for a few minutes of operation. -When the batteries are completely empty, the appliance stops operating and the charging light lights up red continuously.To charge the epilator, see ‘Charging’ above. Using the epilator Clean the epilating head and charge the appliance fully before you use the appliance for the first time. Note:You cannot use the appliance while it is connected to the mains. Epilating tips -Wet: If you are new to epilation, we advise you to star t epilating on wet skin, as water relaxes the skin and makes epilation less painful and gentler. The appliance is waterproof and can be safely used in the shower or bathtub. -Wet: If you want, you can use your common shower gel or foam. -Dry: If you epilate dr y, epilation is easier just after taking a bath or shower. -Dry: Make sure your skin is clean and free from grease. Do not apply any cream to your skin before you star t to epilate. -general: We advise you to epilate in the evening, as skin irritation usually disappears overnight. -general: Epilation is easier and more comfor table when the hairs have a length of 3-4 mm. If the hairs are longer, we recommend that you shave first and epilate the shor ter regrowing hairs after 1 or 2 weeks. Alternatively, you can trim the hairs to 3-4 mm. 10 EnglisH Epilating the legs with the epilator -If you already have some experience with epilation, you can simply use the epilating head with the basic epilation cap. -If your hairs lie flat on your skin, we advise you to use the active hair- lift and massage cap.This cap not only lifts up the hairs but its active massaging roller also minimises the pulling sensation of epilation. Note: Remove the basic epilation cap (1) before you attach another cap (2). 1 Put the cap on the epilating head. 2 Press the on/off button once to switch on the appliance. The appliance starts to operate at speed II, which is the most , efficient speed for epilating. Note: If you want to use speed I, press the on/off button a second time. EnglisH 11 Note: Speed I is suitable for areas with little hair growth and for hard-to-reach areas, such as knees and ankles. 3 4 Stretch the skin with your free hand to make the hairs stand upright (1). Place the epilating head at an angle of 90° onto the skin with the on/off button pointing in the direction in which you are going to move the appliance (2). Slowly move the appliance over the skin against the direction of the hair growth while pressing it lightly. Tip:To relax the skin, we advise you to apply a moisturising cream immediately or a few hours after epilation. For the underarms, use a mild deodorant without alcohol. shaving the underarms and bikini line Use the shaving head to shave sensitive areas, such as the underarms and the bikini line. Note:To get the best shaving resul...