Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: DeLonghi Dateigröße: 170.72 kb Dateiname: Unterrichtssprache:

fig. 4 GB 23-03-2004 16:21 Pagina 3 GB 23-03-2004 16:21 Pagina 4 OPERATION AND USE 1) SETTING THE CLOCK For the first time, set the clock to the correct time, proceeding as follows: • Press the button “hour” until the display shows the hours for the correct time, then release the button. • Press the button “min” until the display shows the minutes for the correct time, then release the button. When setting the correct time, the numbers will flash on the display. The flashing of the numbers will continue for a few seconds after the adjustment has finished then stop on the correct time and the clock start working. To change the time, press pushbuttons “hour” or “min” for at least 5 seconds, then proceed as above to modify both hours and minutes. °F MANAM 0 : Set temperature correct time 2) MANUAL FUNCTIONING To operate the appliance in “manual” mode, press the “ON MODE” button. To set the required power level, proceed as follows: press the “ON MODE" button, and then press again one or more times within 5 seconds to select the power level, as per the following sequence: Maximum power °F MANAM : Medium power °F MANAM : °FMANAM :°F °F MANAM 0 : Minimum power Off At any time during “Manual” operation, pressing the “ON MODE” button once will display the previously set power level for 5 seconds; after this 5 second period, the display will return to show the current operating power. If Maximum power has been selected, adjust the “+” or ”-” button to the desired comfort tem perature, from 42 to 95°F (5 to 35°C). By pushing once the “+” or “-” button the desired temperature (shown on the right side of the display) will increase or decrease of 1°F. Keep pushbutton pressed to move through the temperature in fast mode. correct time °F MANAM : set temperature 4 GB 23-03-2004 16:21 Pagina 5 This heater has Electronic Climate Control which automatically monitors and selects the ideal power setting to maintain your chosen temperature. If the selected temperature is higher than the actual room temperature, the appliance will start automatically and rapidly heat the room until it reaches the selected temperature. The unit will automatically maintain the temperature at a constant level, by switching between maximum, medium, minimum power and OFF. If medium power level has been selected using the “ON MODE” button, the appliance will modulate between medium, minimum power and OFF to maintain a selected temperature. ANTI-FREEZE SETTING Press the “ON MODE” button and it is recommended to select the maximum power level. Set the temperature to 42°F with the “-” button. When set in this way, the appliance will switch on automatically only if the room temperature falls below 42°F, to prevent freezing, at minimum energy consumption. N.B.This function is not guaranteed in the event of power failures, lasting more than 2 minutes. Programming the Electronic Timer The timer allows you to set two programs in a 24h period. To program the timer: Press the “Timer button A, this acce...

Herunterladen

Geben Sie zwei Ziffern: