Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: DeLonghi Dateigröße: 170.72 kb Dateiname: Unterrichtssprache:

SAVE THESE INSTRUCTIONS 2 3 FITTING THE WHEELS Remove the feet with the bracket wheels from the polystyrene packing. Turn the radiator upside-down and rest on the polystyrene. Fit the wheels to the spindles on the feet and push firmly until they click into position. Pull each wheel to check that it is correctly inserted. The feet with the casters must be fitted with two arc-shaped brackets only between the 1st and 2nd element and the penultimate (see fig. 1 to 3 inclusive). HOW TO USE YOUR HEATER fig. 1 fig. 2 fig. 3 MODELS WITH “EASY WHEEL”SYSTEM Turn the radiator upside-down on a rug or a soft surface in order to prevent damaging the paint finish. Fully unfold the castors by turning them outwards (Fig. 4). Turn the radiator back to its upright position. 1. LOCATION Place heater on floor beneath coldest window in the room or any desired location. Your heater will minimize the effect of cold drafts. The heater must not be located immediately below a socket-outlet. Do not use this radiator in rooms having a surface area less than 4 m2 (43 sq. ft.). 2. CONNECTION The radiator must be connected to a properly polarized A/C 110/120 V household outlet in perfect working conditions. Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater plug is fitted in. Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. fig. 4 GB 23-03-2004 16:21 Pagina 3 GB 23-03-2004 16:21 Pagina 4 OPERATION AND USE 1) SETTING THE CLOCK For the first time, set the clock to the correct time, proceeding as follows: • Press the button “hour” until the display shows the hours for the correct time, then release the button. • Press the button “min” until the display shows the minutes for the correct time, then release the button. When setting the correct time, the numbers will flash on the display. The flashing of the numbers will continue for a few seconds after the adjustment has finished then stop on the correct time and the clock start working. To change the time, press pushbuttons “hour” or “min” for at least 5 seconds, then proceed as above to modify both hours and minutes. °F MANAM 0 : Set temperature correct time 2) MANUAL FUNCTIONING To operate the appliance in “manual” mode, press the “ON MODE” button. To set the required power level, proceed as follows: press the “ON MODE" button, and then press again one or more times within 5 seconds to select the power level, as per the following sequence: Maximum power °F MANAM : Medium power °F MANAM : °FMANAM :°F °F MANAM 0 : Minimum power Off At any time during “Manual” operation, pressing the “ON MODE” but...

Herunterladen

Geben Sie zwei Ziffern: