Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Storageflex Dateigröße: 585.79 kb Dateiname: Unterrichtssprache:

Reflector LC10NG-01-01-01 LC20NGT-01-01-01 LC30NGTF-01-01-01 5. Heat Cover – Upper LC10NG-01-01-02 LI18LPT-01-01-02 LC30NGTF-01-01-02 6a. Pressure Regulator – Natural RTZ-11/20B5 RTZ-11/20B1 RTZ-11/20B1 6b. Pressure Regulator – LP RTZ-11/20B2 RTZ-11/20B2 RTZ-11/20B2 7. Nozzle Holder LC10NG-03-13 LC10NG-03-13 LC10NG-03-13 8a. ODS Pilot Assembly – Natural NG 8224 NG 8224 NG 8224 8b. ODS Pilot Assembly – LP LPG 8420 LPG 8420 LPG 8420 9. Fix Nut – Nozzle Holder LC10NG-03-11 LC10NG-03-11 LC10NG-03-11 10a. Main Nozzle – Natural LC10NG-03-12 LC20NG-03-12 LC30NGTF-03-12 10b. Main Nozzle – LP LC10LP-03-12 LC20LP-03-12 LC30LP-03-12 11a. Valve Bracket-Manual Gas Control LC10NG-04-02 LC10NG-04-02 LC10NG-04-02 11b. Valve Bracket-Thermostat Gas Control LI18LPT-04-02 LI18LPT-04-02 LI18LPT-04-02 12a. Manual Gas Control-Natural CK-890SL-A1/00(C) CK-890SL-A1/00(F) CK-890SL-A1/00(F) 12b. Manual Gas Control-LP CK-890SL-A1/00(C) CK-890SL-A1/00(F) CK-890SL-A1/00(F) 12c. Thermostat Gas Control-Natural LC10NGT-04-00 LC20NGT-04-00 LC30NGTF-04-00 12d. Thermostat Gas Control-LP LC10NGT-04-00 LC20NGT-04-00 LC30NGTF-04-00 13. Outlet Tubing Assembly LC10NG-08-00 LC20NG-08-00 LC30LP-08-00 14. ODS Tubing Assembly LC10NG-09-00 LC20NG-09-00 LC30LP-09-00 15. Inlet Tubing Assembly LC10NG-07-00 LC20NG-07-00 LC30LP-07-00 16. Leg – Front LC10NG-05 LC10NG-05 LC10NG-05 17. Front Panel LC10NG-01-03 LI18LPT-01-03 LC30NGTF-01-03 18. Burner Assembly LC10NG-03-00 LC20NGT-03-00 LC30NGTF-03-00 19a. Burner Support – Left LC10NG-03-08 LC10NG-03-08 LC10NG-03-08 19b. Burner Support – Right LC10NG-03-09 LC10NG-03-09 LC10NG-03-09 20. Body Frame Assembly LC10NG-02-00 LC20NG-02-00 LC30LP-02-00 21. Leg – Rear LC10NG-04 LC10NG-04 LC10NG-04 22. Knob – Valve LC10NG-12-00 LC10NG-12-00 LC10NG-12-00 23. Shield -LI18LPT-01 - 24. Rear Radiant Shield LC10NG-01 LC30NGTF-01 25. Optional Fan-Natural/LP -RMA-FT RMA-FT The following accessories are available from your local distributors/dealer. Each accessory comes with a separate installation instruction. Be sure to read each instruction thoroughly before installation. Accessories OPERATION & MAINTENANCE INSTRUCTIONS FMA-(F,FT) MANUALLY & THERMOSTATICALLY CONTROLLED BLOWERS IMPORTANT: The blower power cord is equipped with a three prong grounding plug for your safety and protection against electric shock. Do not modify the plug provided if it will not fit the outlet source. Have the proper source outlet installed near the heater location to avoid damage to the power cord. Source outlet and grounding plug are illustrated in the Fig. 12. Description Model Number Manual Fan Kit FMA-F Thermostat Fan Kit FMA-FT Fig. 12 CFM Home Products reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time, without notice. WARNING: Failure to position the parts in accordance with this diagram or failure to use only parts specifically approved with this heater may result in property damage or personal injury. Accessories continued CAUTION: Damaged power cord can cause a fire or electric shock. Prior to installing the blower, check for blower for any shipping damage. If blower is damaged, promptly inform dealer where you bought the blower. INSTALLATION: Plug the blower power cord into a 110-120V properly grounded type outlet (three prong receptacle) protected by a 15 amp time delay or Circuit Saver fuse for circuit breaker. WARNING: Do not let your fingers touch the prongs of plug when installing or removing the plug from the power outlet. OPERATION: Manually Operated: Use the ON/OFF rocker switch to manually switch the blower ON or OFF as desired. Manually & Thermostatically Controlled: Use the MAN/OFF/AUTO rocker switch to MAN for manual ON or AUTO for thermostatically controlled operation as desired. Thermostat turns the blower ON when the temperature near the discharge area reaches 105F and turns it OFF when the temperature at the aforementioned location goes down to 86F. MAINTENANCE: WARNING: For your safety, turn switch “OFF” and remove plug from power source outlet before cleaning and maintaining blower. If power cord is worn, cut, or damaged in any way, have it replaced immediately. CARE OF BLOWER In normal use, blower may accumulate excessive lint or dust, so the blower should be vacuumed or brushed and checked for proper operation at least once each year by a qualified service personnel. Excessive accumulation of lint and dust can cause the blower motor to overheat frequently and burn out. WARRANTY WARRANTY Service and Limited Warranty CFM Home Products warrants this product to be free from defects in materials and components for three (3) years from the date of first purchase, provided that the product has been properly installed, operated and maintained in accordance with all applicable instructions. To make a claim under this warranty the Bill of Sale or cancelled check must be presented. This warranty is extended only to the original retail purchaser. This warran...

Herunterladen

Geben Sie zwei Ziffern: