Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Casio Dateigröße: 1.03 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Casio  XJ-ST145

When this happens, use this setting to adjust the frequency manually. Important! If, for some reason, your manual frequency settings cause the image input from the computer to disappear from the projection, you can press the [AUTO] key to perform an auto adjust operation, which should cause the image to appear. Phase R Signal Specific When there is flickering in the projected image while RGB is selected as the input source, it means that the phase setting is not correct. When this happens, use this setting to adjust the phase manually. Restore Menu Defaults RC V Source Specific Use this sub-menu to return all of the sub-menu items on the Image Adjustment 2 main menu to their initial default settings. • Restoring menu defaults will restore defaults for the current signal type (XGA/60Hz, SXGA/60Hz, etc.) only. About the “Signal Specific” Setting Unit For the items that have “Signal Specific” in the “Setting Unit” column of the above table, the setting is saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is being input when the setting is performed, and not for a specific input source. Volume Adjustment Main Menu Setting Name Input Setting Unit Description Volume RC VH DU N Source Specific Use this sub-menu to adjust the volume level of the projector’s speaker. • Changing this setting when there is no input signal changes the volume setting of the currently selected signal source. Restore Menu Defaults RC VH DU N Source Specific Use this sub-menu to return Volume to its initial default setting. • Restoring menu defaults when there is no input signal will restore defaults for the currently selected input source. 31 Screen Settings Main Menu Setting Name Input Setting Unit Description Keystone Correction RC VH DU N Single Use this sub-menu to correct vertical keystoning of the projected image. Aspect Ratio RC VH D Source Specific Use this sub-menu to select an aspect ratio setting for the projected image. Input Source: RGB or HDMI (PC) Normal*: Projects at the projector’s maximum possible size while maintaining the input signal aspect ratio. Full: Projects at the projector’s maximum possible size by enlarging or reducing the input signal. Input Source: Video, S-video, Component or HDMI (DTV) Normal*: Projects at the projector’s maximum possible size while maintaining the input signal aspect ratio. 16:9 : This setting specifies a 16:9 aspect ratio, which is the same as a movie screen, high-definition TV, etc. Using this setting when the input signal is a 16:9 image that has been squeezed to a 4:3 image causes the image to be displayed with its normal 16:9 aspect ratio. Note • When the input source is a component or an HDMI (DTV) signal with an aspect ratio of 16:9, the aspect ratio is fixed at 16:9. The aspect ratio setting cannot be changed in this case. • For details about projection screen display conditions for different aspect ratio settings, see “Aspect Ratio Setting and Projection Image” (page 50). Important! Note that enlarging or reducing the size of an image for commercial purposes or public presentation may infringe on the legally protected copyright of the copyright holder of the original material. Projection RC VH DU N Single Use this sub-menu to specify whether projection will be from the Mode front of the screen or the back of the screen. Front*: Select this option to project from the front of the screen. Rear: Select this option to project from the back of the screen. This setting flips the front projected image horizontally. Ceiling Mount RC VH DU N Single Use this sub-menu to configure the projector for use in an installation in which it is positioned upside down. On: Flips the projected image horizontally and vertically. Off*: Projects a normal image. 32 Setting Name Input Setting Unit Description Startup Screen RC VH DU N Single Use this sub-menu to specify whether or not a startup screen should be projected whenever the projector is turned on. Logo: Select this option to project the projector’s built-in logo screen at startup. None*: Select this option when you do not want to project a startup screen. No Signal Screen RC VH DU N Single Use this sub-menu to specify what should be projected when there is no input signal to the projector. Blue*: Select this option to project a blue screen. Black: Select this option to project a black screen. Logo: Select this option to project the projector’s built-in logo screen. Blank Screen RC VH DU N Single Use this sub-menu to specify what should be projected after the [BLANK] key is pressed. Blue: Select this option to project a blue screen. Black*: Select this option to project a black screen. Logo: Select this option to project the projector’s built-in logo screen. Restore Menu Defaults RC VH DU N Source Specific Use this sub-menu to return all of the sub-menu items on the Screen Settings main menu to their initial default settings. • Restoring menu defaults when there is no input signal will restore defaults for the currently select...

Herunterladen

Geben Sie zwei Ziffern: