Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
(When the generator is connected to the in- installing a Double-Throw coming utility could result in a fire or Transfer Switch, a minimum of serious damage if a isolator switch is 10 gauge wiring must be used.) not installed. Failure to use a double throw transfer switch when connecting to a structures electrical system can damage appliances and WILL VOID the manufacturers warranty. MGP-670070 3 — ENG READ AND UNDERSTAND ALL WARNINGS BEFORE ATTEMPTING TO OPERATE GENERATOR. RISK OF ELECTROCUTION AND FIRE (cont’d) HAZARD WHAT COULD HAPPEN HOW TO PREVENT IT Operation of generator in rain, wet, icy, or flooded conditions. Water is an excellent conductor of electricity! Water which comes in contact with electrically charged components can transmit electricity to the frame and other surfaces, resulting in electrical shock to anyone contacting them. Operate generator in a clean, dry, well ventilated area. Make sure hands are dry before touching unit. Use of worn damaged, undersized Contact with worn or damaged exten-Inspect extension cords before use or ungrounded extension cords. sion cords could result in electrocution. Use of undersize extension cords could result in overheating of the wires or attached items, resulting in fire. Use of ungrounded cordsets could prevent operation of circuit breakers and result in electrical shock. and replace with new cord if required. Use proper size (wire gauge) cordset for application see chart in the Assembly section of this manual. Always use a cordset having a grounding wire with an appropriate grounding plug. DO NOT use an ungrounded plug. Placing generator on or against Accidental leakage of electrical current Place generator on low conductivhighly conductive surface, such as could charge conductive surfaces in ity surface such as a concrete a steel walkway or metal roof. contact with the generator. slab. ALWAYS operate generator a minimum of six feet from any conductive surface. Improper connection of items to generator. Exceeding the load capacity of the generator by attaching too many items, or items with very high load ratings to it could result in overheating of some items or their attachment wiring resulting in fire or electrical shock. Read the load rating chart and instructions in the Wattage Calculation section. Make sure that the summation of electrical loads for all attachments does not exceed the load rating of the generator. Operation of unit when damaged, or with guards or panels removed. Attempting to use the unit when it has been damaged, or when it is not functioning normally could result in fire or electrocution. Removal of guarding could expose electrically charged components and result in electrocution. Do not operate generator with mechanical or electrical problem. Have unit repaired by an Authorized Service Center. Do not operate generator with protective guarding removed. MGP-670070 4 — ENG READ AND UNDERSTAND ALL WARNINGS BEFORE ATTEMPTING TO OPERATE GENERATOR. RISK OF FIRE HAZARD WHAT COULD HAPPEN HOW TO PREVENT IT Attempting to fill the fuel tank while the engine is running. Sparks, fire, hot objects Gasoline and gasoline vapors can become ignited by coming in contact with hot components such as the muffler, engine exhaust gases, or from an electrical spark. Cigarettes, sparks, fires, or other hot objects can cause gasoline or gasoline vapors to ignite. Turn engine off and allow it to cool before adding fuel to the tank. Equip area of operation with a fire extinguisher certified to handle gasoline or fuel fires. Add fuel to tank in well ventilated area. Make sure there are no sources of ignition near the generator. Improper storage of fuel Improperly stored fuel could lead to accidental ignition. Fuel improperly secured could get into the hands of children or other unqualified persons. Store fuel in a OSHA approved container designed to hold gasoline. Store container in secure location to prevent use by others. Inadequate ventilation for generator Materials placed against or near the generator or operating the generator in areas where the temperature exceeds 104° F. ambient (such as storage rooms or garages) can interfere with its proper ventilation features causing overheating and possible ignition of the materials or buildings. Operate generator in a clean, dry, well ventilated area a minimum of four feet from any building, object or wall. DO NOT OPERATE UNIT INDOORS OR IN ANY CONFINED AREA. Tampering with factory set engine speed settings. Engine speed has been factory set to provide safe operation. Tampering with the engine speed adjustment could result in overheating of attachments and could cause a fire. Never attempt to “speed-up” the engine to obtain more performance. Both the output voltage and frequency will be thrown out of standard by this practice, endangering attachments and the user. Overfilling the fuel tank – fuel spillage. Spilled fuel and its vapors can become ignited from hot surfaces or sparks. Use care in filling the tank t...
Dieses Handbuch ist für folgende Modelle:Stromerzeuger - MGP-670070 (1.35 mb)