Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Vulcan-Hart Dateigröße: 1.13 mb Dateiname: Unterrichtssprache:

EXAMPLE: Ifat9o'clock P.M.yousetthe ovento cleanfor 3hours,the calculated stop time would be "12:00 AM". The Display would Show: rE .ULI C_E_STOP,_ CL_ Ifyouwant thestoptime tobe 1o'clockAM, turntheSet DialuntiltheDisplayshows: t.LIU -'."1/'-I Threesecondsafterturningdial,thetimeofdayreturnstotheDisplay. TheIndicator WordDELAYwillcomeon. TheLOCKIndicatorWordwillcomeonandthecooling fan will go off as soon as the oven door has latched. When the oven begins to clean, the IndicatorWord ON and the cooling fan will come on and the Indicator Word DELAY will go off. When the clean time has been completed, the Indicator Words CLEAN and ON will go off. The Indicator Word LOCK and the cooling fan will remain on until the oven has cooled down and the door has unlocked. 30 To recall cleaning time or stop time: Touch the appropriate time pad. To change cleaning time or stop time before cleaning begins: Repeatthe preceding steps. To cancel cleaning process: Touch Cancel Pad. The oven door will be locked whiletheLOCKIndicatorWordremainsintheDisplay. Dependingonthelengthoftime the oven had beenself-cleaning, it maytake upto 45minutesforthe oventocooldown, the door to unlock and cooling fan to turn off. NOTE WW2780 OWNERS: Both ovens CANNOT be cleaned at the same time. The LOCK Indicator Word for the first oven must go off before setting the second oven for a clean. NOTE WW2780 OWNERS: Ifoneoven isset to clean, theother oven cannotbe setfor clock controlled baking. NOTE: When the Clean Pad is touched a fan comes on. If this fan is not operating, the oven will go through the self-cleaning process at a reduced oven temperature and the oven will not clean effectively. Ifthe fan does not operate, contact your Jenn-Air Authorized Service Contractor for service. 31 More Information on the Self-Cleaning Process • A slight odor may be detected, and if an oven is heavily soiled, some smoke may be visible. Some smoke and odor during the cleaning process isa normal occurrence. Since the oven vent is vented on the top of the control panel, vapors, moisture, etc.maybe seen coming from this area. • During the cleaning process, do not bealarmed if an occasional flame is visible through the oven window. This is caused by excessive food soil that was not removed before the oven was set to clean. • SINCE THE DOOR AND WINDOW OF THE OVEN WILL GET WARM DURING THE SELF-CLEANING PROCESS, AVOID CONTACT. • Some types of soil may disintegrate but leave a light film or heavier deposit of ash. The amount of ash depends on the amount of soil which was in the oven. After oven has cooled, this ash may be removed with a damp sponge. If other dark deposits remain after wiping with a sponge, the time set for the length of cleaning was not enough. Increase the cleaning time for future cleanings or clean more frequently. The normal cleaning time is 2 1/2 hours. A maximum of 4 hours may be selected if necessary. • Ifracks have been left in even during the cleaning process, they should be treated as follows. After the cleaning process is completed and the oven has cooled, buff the underside of rack edges with Scotch-Brite scour-pad or rub lightlythe underside of rack edges with a coating of vegetable oil. Use a light application of oil so it does not soil the oven. As a suggestion, use fingertips to apply oil. This will make the cleaned racks slide more easily. • Toremoveoccasionalspilloversbetweencleanings,useasoap-filledscouring pad or mild cleanser; rinse well. • Itisbettertocleantheovenregularlyratherthanwaituntilthereisaheavybuildup of soil in the oven. • During the cleaning process, the kitchen should be well ventilated to help eliminate normal odors associated with cleaning. • DO NOT USE COMMERCIAL OVEN CLEANERS. • DO NOT USE ALUMINUM FOIL OR OTHER LINERS IN THE OVEN. 32 Other Hints on Caring for Your Oven Cleaning OtherSurfacesof Your Oven Doorand control panel trim: The metal trim around the door and the control panel can be cleaned with any nonabrasive cleansers such as Ben Ami or soapy water, rinse well. Be careful not to use an excessive amount of water. Glass on the oven door front: To clean, use any suitable glass cleaner or soapy water. Topreventmoisturefromgettingbehindtheglasscontrolpanel,sprayaclothwith glass cleaner then wipe the panel. Control Knob: Controlknobcanberemovedforcleaning.Washinwarmsoapywater. Match the "D" shaped hole in the knob to the "D" shaft when replacing. Control Panel: Wipe with a damp cloth. Drythoroughly. Donotusecleaningsprays, large amounts of soap and water, abrasives, or sharp objects on the panel-they can damage it. Oven Racks __' _ Toremovepullforwardtothe"stop"position;lift ___)j_t_/_f up on the front of the rack and pull out. _ ".......\ _/1_ I I\[_1 Oven Light Bulb Before replacing bulb, disconnectpowerto ovenatthemainfuseorcircuitbreakerpanel. Be sure that the entire oven cavity including the light bulb is cool before attempting to remove. To replace light bulb: 1. Carefully remove the glass light lens and len...

Herunterladen

Geben Sie zwei Ziffern: