It should be purposes and only with whole It should not be used for the diagnosis of diabetes. CAUTION: Before using any to test all instructions and practice the test. checks as and consult professional. These recommendations supported by the Diabetes Educator Section of This system contains many Keep away from young children. Important phone numbers: LifeScan Customer Care Line (Monday–Friday 9 AM–8 PM Eastern Time): 1 800 663-5521 Write your meter serial number: Diabetes healthcare profession

Using another control solution could present incorrect results. Remove a test strip from the bottle. Tightly close the bottle lid Immediately after you have removed the test strip. NOTE: Check the expiry and discard date. Make sure the test strip does not appear torn or damaged. Hold the test strip with the grey end facing up. Insert the grey end into the test strip port on the meter. The meter will turn on. A test strip with a flashing blood drop will appear letting you know the meter is r

Insert a test strip into the test port as shown. The three contact bars should be facing you. The meter will turn on and display the code from your last test. If you are using the meter for the first time, a constant Cand a flashing “——” appears instead of a code. If the code on the meter does not match the code on the test strip vial, press ^ or Ў to match the code number on the test strip vial. The display will then advance to the screen with the flashing blood drop icon . If the flashing bloo

For your records Assistance Availability Emergency kit Pump and user guide conventions Your pump Installing the battery the first time Home screen Modes of operation NormalMiniMedThis areawill not haveor Special Attention Pump buttons Main menu Bolus menu Suspend Basal menu Prime menu Utilities menu Initial pump settings Basal rate information Meal boluses Correction bolus Blood glucose targets Reservoir and infusion sets Preparing your pump for use Setting the time and date Installing the reser

If your ratio value is outside the range, this the usual range of 5-50.* warning message will appear on the screen. ESC to correct, ACT to continue Press ESC to correct or ACT to continue. (* 0.3 - 3.0 for exch) To set just one ratio: To set more than one carb ratio: 6 The screen will return to the EDIT SETTINGS screen. Set your BG Units as described in the “BG (blood glucose) units” on page 69. 68 Chapter: 5 a. Press ESC. using grams using exchanges (flashing) (flashing) SET START TIME 2 _: _ g

It should not be used for the diagnosis of diabetes. ^ CAUTION This product contains a barcode scanner. It is a class II laser which operates at 680 nm and uses 0.88 mW of energy. This product meets 21 CFR (Code of Federal Regulations) 1040.10* laser light when activated. Do not stare into the laser beam. Refer to page 8 of this guide for information and instructions on barcode scanner operation. ©2002, 1996 LifeScan, Inc. All rights reserved. The system described herein is covered by one or mor

OneTouch® Ultra test strips are designed to be used with the InDuo™ blood glucose meter. PenFill® 3 mL cartridges and NovoFine® needles are designed to be used with the InDuo™ insulin doser. PenFill® not included. PenFill® and NovoFine® are trademarks of Novo Nordisk A/S. IN TOUCH® and OneTouch® are trademarks of LifeScan, Inc. InDuo™ is a trademark of Johnson and Johnson Co. Protected by US Patent Nos. 5,957,889; 5,961,496; and 6,045,537. Additional patents pending. The CE-mark on the InDuo™ do

Everything you need to know about the ONE TOUCH II System is included in this booklet. If you would like a helpful/instructional audio cassette tape of the ONE TOUCH II test procedure, please call LifeScan Canada Customer Service at 1 800 663-5521. Blood glucose monitoring plays an important part in controlling your diabetes. The results you obtain with the ONE TOUCH II System can help you and your healthcare professional monitor and adjust your treatment plan (diet, exercise and medication) to

. 2000 Bayer Corporation. All rights reserved. 115701 Rev C., 4/2000 No part of this manual or the products it describes may be reproduced by any means or in any form without prior consent in writing from Bayer Corporation. The Rapidlab 800 system is for In Vitro Diagnostics Use. Certain and Ready Sensors are trademarks of Bayer Corporation. APV is a servicemark of Bayer Corporation. Cidex is a trademark of Johnson & Johnson Corporation. IBM and AT are trademarks of International Business Machin

If You Have Any Questions, Comments or Need Help With Reimbursement For Your Testing Supplies, Please Call 1-800-348-8100. Introduction What it is: The Ascensia ELITE™ Diabetes Care System is a blood glucose monitoring system. The system is made up of the Ascensia ELITE™ Meter, Test Strip, and Code Strip. For quality control of the system, the Ascensia ELITE™ Check Strip and Normal, Low and High Controls are also available. How it works: The Ascensia ELITE blood glucose testing process is based