Rev. 1.01 24 900.0570 8-Sept-05 SECTION 6: PTZ CONTROL FUNCTIONS WHEN USING HONEYWELL VCL (RAPIDDOME/ORBITER DOME) PROTOCOL 6.1 PTZ CAMERA SELECTION CONTROL The PTZ cameras can be controlled while the keyboard is in any mode (DVR, Multiplexer, or PTZ). The keyboard sends out standard telemetry to a PTZ or other receiver connected via RS485. Before a PTZ can be controlled it must first be selected by pressing one or two of the number keys (to enter a legal camera number) followed by the ‘camera’

If a user password is required, keep the key (‘search’, ‘play’, ‘rw’, ‘ff, or ‘rec’) pressed whilst entering the password. Alternately, press and hold the ‘Fn’ key, then press the number keys Press the ‘search’ key to bring up the ‘search’ menu. Press the key again to exit the ‘search’ menu. Press the ‘counter’ key to toggle the DVR display between displaying or not displaying the remaining storage capacity. To increase the speed of rewind or fast forward, press the ‘rew’ or ‘ff’ key up to four

Selects a menu or accepts text in a field. 5.2.1 Dome Setup Menu To access the KD6/HD6 menu, you must be logged in as a Master user. 1. Press the Dome Menu ( 1. ___ 3. ___) key. The following is displayed on the LCD screen. 2. Press Enter () to access the Dome Setup Menu. The controller LCD display changes to: < DOME MENU > Dome Setup Menu Select function > A < UltraDome HD6i 5.2.1 Dome Setup Menu, Continued The on-screen menu is displayed on the monitor where the KD6/HD6 video is viewed. To acc

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s au