Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Sony Dateigröße: 3.49 mb Dateiname: Unterrichtssprache:

When a message stating that the Internet connection will be terminated is displayed, select “Yes”, and then press the button. Network Adjusting network settings 3 Select "Easy", and then press the button. Using a wireless connection The following instructions explain how to connect to the Internet using a wireless connection. A list of settings is displayed after the network configuration is checked. Easy Basic settings are set automatically. You can manually enter detailed settings information. For Custom information on settings, refer to the instructions supplied by the Internet service provider or with the network device. 4 Check the settings, and then press the button. For detailed information on network settings, refer to the user's guide ( page 29). Hint For some network environments, screens for setting options such as PPPoE, proxy server, and IP address may be displayed during this procedure. If this happens, refer to the instructions supplied by your Internet service provider to set the required items. • An access point is a device that allows you to connect to a network wirelessly. • A wireless router is a device that adds access point functionality to a router. A router is necessary if a PC and a PS3™ system will be connected to the Internet at the same time using one Internet connection. US FR Example of a wireless network confi guration ES The network configuration and connection method may vary depending on the equipment in use and the network environment. Network gateway device such as a DSL or cable Access point or wireless router WAN LAN1 LAN2 LAN3 LAN4ETHERETHER modem To the Internet line PCPC Hints Network Adjusting network settings Preparing the required items 1 Check that an Ethernet cable is not connected to the system. The following items are required to set up the system to connect 2 Select (Network Settings) "Internet Connection wirelessly to the Internet. Settings" under (Settings) in the home menu, and then press the button. • A broadband Internet connection via a device such as a DSL or cable modem (connection of multiple devices may require When a message stating that the Internet connection will be terminated is additional hardware) displayed, select “Yes”, and then press the button. • An access point or wireless router 3 Select "Easy", and then press the button. • Settings information for the access point (SSID, WEP key, WPA key) Hints • SSID, WEP key, and WPA key are types of security information that are required when connecting to an access point. • When connecting to the Internet wirelessly, signal interference may occur depending on the usage condition of the wireless network devices. If Internet data transfer speed is decreased or the wireless controller does not function properly, use a commercially available Ethernet cable to connect to the Internet. • Depending on the access point in use, you may need the MAC address for your system when connecting to the Internet. You can find the MAC address for the system by going to (Settings) (System Settings) "System Information". • User is responsible for Internet service fees. Setting up the Internet connection Internet connection settings vary according to the network environment and the devices in use. The following procedure describes a typical setup. Easy Basic settings are set automatically. You can manually enter detailed settings information. For Custom information on settings, refer to the instructions supplied by the Internet service provider or with the network device. Network Adjusting network settings 4 Select "Wireless", and then press the button. 5 Select "Scan", and then press the button. The system will search for access points within range and display them as a list. Hint When using an access point that supports automatic setup, select "Automatic" and follow the on-screen instructions. The required settings will be completed automatically. For information on access points that support automatic setup, 6 Select the access point that you want to use, and then press the button. An SSID is a code or a name that is assigned to the access point. If you do not know which SSID to use or if the SSID is not displayed, contact the person who set up or maintains the access point. 7 Confirm the SSID for the access point, and then press the button. US FR ES contact the access point manufacturers. Network Adjusting network settings 8 Select the security settings as necessary, and then press the button. Security settings vary depending on the access point in use. To determine which settings to use, contact the person who set up or maintains the access point. 9 Enter the encryption key, and then press the button. The encryption key field will display an asterisk (*) for each character you enter. If you do not know the key, contact the person who set up or maintains the access point. After you have finished entering the encryption key and the network configuration has been checked, a list of settings will be displayed. 10 Check...

Herunterladen

Geben Sie zwei Ziffern: