Stimmen - 6, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Garmin Dateigröße: 4.88 mb Dateiname: Unterrichtssprache:

Simulator Mode . WARNING Do not try to navigate using simulator mode because the GPS receiver is turned off. Any satellite signal strength bars shown are simulations and do not represent the strength of actual satellite signals. Simulator mode turns the GPS receiver off for use indoors or for practice using the chartplotter. The chartplotter does not track satellites in simulator mode. Turning Simulator Mode On From the Home screen, select Configure > System > Simulator > on. Configuring Simulator Mode 1. From the Home screen, select Configure > System > Simulator > Setup. 2. Complete an action: • Select Speed. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the speed of your boat in simulator mode. For the GPSMAP 7000 series, use the on-screen keyboard. Select Done. • Select track Control. Select Auto track to allow the chartplotter to set the heading automatically, or select User track to set the heading manually. • Select Set Position. For the GPSMAP 6000 series, use the Rocker to select the simulated position of your boat. For the GPSMAP 7000 series, touch the navigation chart. Select Select. • Select Set time. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the time. For the GPSMAP 7000 series, use the on-screen keyboard. Select Done. • Select Set Date. For the GPSMAP 6000 series, use the Rocker to enter the date. For the GPSMAP 7000 series, use the on-screen keyboard. Select Done. GPSMAP® 6000/7000 Series Owner’s Manual 7 Device Configuration Turning the Chartplotter On Automatically From the Home screen, select Configure > System > Auto Power Up. When you select on, the chartplotter automatically turns on whenever power is applied. When you select off, the chartplotter must be turned on with the Power key. Note: If Auto Power Up is on and the chartplotter is turned off using the Power key, and power is removed and reapplied within less than two minutes, you may have to press the Power key to restart the chartplotter. Display Configuration Setting the Sound You can set when the chartplotter makes audible sounds. 1. From the Home screen, select Configure > System > Beeper/Display > Beeper. 2. Complete an action: • Select Alarms only to have the chartplotter beep only when alarms are triggered (default). • Select Key and Alarm to have the chartplotter beep when keys are pressed and when alarms are triggered. Setting the Language You can select the language that appears on the chartplotter. 1. From the Home screen, select Configure > Preferences > Language. 2. Select a language. Navigation Preferences Route Settings Selecting a Route Label Type You can select the type of labels shown with route turns on the map. 1. From the Home screen, select Configure > Preferences > Navigation > Route Labels. 2. Complete an action: • Select Show Name to identify route turns using waypoint names. • Select Show Number to identify route turns using numbers, such as Turn 1 and Turn 2. Configuring Route Turn Transitions You can set how much time or how far before a turn in a route that you transition to the next leg. Raising this value can help improve the accuracy of the autopilot when navigating a route or an Auto Guidance line with many frequent turns, or at higher speeds. For straighter routes or slower speeds, lowering this value can improve autopilot accuracy. 1. From the Home screen, select Configure > Preferences > Navigation > turn transition > Activation. 2. Complete an action: • Select time. Select Change time. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the time. For the GPSMAP 7000 series, use the on-screen keyboard. GPSMAP® 6000/7000 Series Owner’s Manual Device Configuration • Select Distance. Select Change Distance. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the distance. For the GPSMAP 7000 series, use the on-screen keyboard. 3. Select Done. Configuring Speed Data Sources You can specify the source of the speed data that is used to calculate true wind speed or fuel economy. Water speed is the speed reading from a water-speed sensor, and GPS speed is calculated from your GPS position. 1. From the Home screen, select Configure > Preferences > Navigation > Speed Sources. 2. Complete an action: • Select Wind, and indicate whether the calculated wind speed data comes from a Water Speed sensor, if it is based on the GPS Speed, or whether the chartplotter selects a speed data source automatically. • Select Fuel economy, and indicate whether the speed data that is used to calculate fuel economy comes from a Water Speed sensor or if it is based on the GPS Speed. Auto Guidance Line Configurations You can set the data the chartplotter uses when calculating an Auto Guidance line. Note: Auto Guidance is available with a preprogrammed BlueChart g2 Vision data card. Safe Water Depth and Safe Obstacle Height . CAUTION The Safe Depth and Safe Height settings influence how the chartplotter calculates an Auto Guid...

Herunterladen

Geben Sie zwei Ziffern: