Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Garmin Dateigröße: 4.88 mb Dateiname: Unterrichtssprache:

Vessel Trails on the Navigation Chart You can view trails for all tracked vessels on the Navigation chart, the Fishing chart, the Mariner’s Eye 3D chart view, and the Radar Overlay. By default, a black dot appears for each previously reported position of a tracked vessel, and a Blue Flag symbol indicates the last reported position of the vessel. A black line indicating the path of the vessel also appears. You must enable the DSC Trails setting in order to view trails for tracked vessels (page 112). Note: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision data card. Last-reported vessel position Position-report location Vessel trail Vessel Trail on the Navigation Chart GPSMAP® 6000/7000 Series Owner’s Manual Digital Selective Calling Showing and Setting the Duration of Trails for All Tracked Vessels Note: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision data card. 1. From the Home screen, select Charts. 2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s eye 3D. 3. Select Menu > other Vessels > DSC > DSC trails. 4. Select the number of hours to show tracked vessels on the chart or 3D chart view. For example, if you select 4 Hours, all trail points that are less than four hours old appear for all tracked vessels. Showing the Trail Line for a Tracked Vessel You can show the trail line for a specific tracked vessel. Note: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision data card. 1. From the Home screen, select Charts. 2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s eye 3D. 3. Select Menu > other Vessels > DSC > DSC List. 4. Select a vessel. 5. Select Review > edit > trail > Show. Changing the Appearance of a Trail Line You can change the appearance of a trail line for a specific tracked vessel. Note: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision data card. 1. From the Home screen, select Charts. 2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s eye 3D. 3. Select Menu > other Vessels > DSC > DSC List. 4. Select a vessel. 5. Select Review > edit > trail Line. 6. Select a color for the trail line. Individual Routine Calls When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use the chartplotter interface to set up an individual routine call. When setting up an individual routine call from your chartplotter, you can select the DSC channel on which you want to communicate (page 113). The radio transmits this request with your call. GPSMAP® 6000/7000 Series Owner’s Manual Digital Selective Calling Selecting a DSC Channel Note: The selection of a DSC channel is limited to those channels that are available in all frequency bands: 6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 69, 71, 72, 73, or 77. The default channel is 72. If you select a different channel, the chartplotter uses that channel for subsequent calls until you call using another channel. 1. From the Home screen, select Information > DSC List. 2. Select a vessel or a station to call. 3. Select Review > Call with Radio > Channel. 4. Select a channel. Making an Individual Routine Call Note: When initiating a call from the chartplotter, if the radio does not have an MMSI number programmed, the radio will not receive call information. 1. From the Home screen, select Information > DSC List. 2. Select a vessel or a station to call. 3. Select Review > Call with Radio > Send. The chartplotter sends information about the call to the radio. 4. On your Garmin VHF radio, select Call. Making an Individual Routine Call to an AIS Target When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use the chartplotter interface to set up an individual routine call to an AIS target. Before you start the call, you can select a DSC channel other than the default channel, channel 72 (page 113). 1. From the Home screen, select Charts. 2. Select a chart or a 3D chart view. 3. Complete an action: • For the GPSMAP 6000 series, use the Rocker to select an AIS target . • For the GPSMAP 7000 series, touch an AIS target . 4. Select AIS Vessel > Call with Radio > Send. The chartplotter sends information about the call to the radio. 5. On your Garmin VHF radio, select Call. GPSMAP® 6000/7000 Series Owner’s Manual Appendix Appendix Specifications Physical Specifications Specification Size Weight Display Case Temp. Range Compass Safe Distance Hg Devices GPSMAP 6008, 6208 Measurement W . H . D: 11 1/2 . 7 3/8 . 5 7/8 in. (291.5 . 187.8 . 148.5 mm) GPSMAP 6012, 6212 W . H . D: 15 1/32 . 9 57/64 . 5 27/32 in. (381.7 . 251.2 . 148.7 mm) GPSMAP 7012, 7212 W . H . D: 13 9/32 . 9 7/8 . 5 27/32 in. (336.8 . 251.5 . 147.8 mm) GPSMAP 7015, 7215 W . H . D: 15 17/32 . 11 27/32 . 5 7/8 in. (394.9 . 300.7 . 148.5 mm) GPSMAP 6008, 6208 11 lb., 5 oz. (5.12 kg) GPSMAP 6012, 6212 15 lb., 15 oz. (7....

Herunterladen

Geben Sie zwei Ziffern: