15997-0-0903 Page 5 Page 6 15997-0-0903 LS-24FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). LS-24FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). Page 715997-0-0903 LS-30FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). LS-30FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not c

Consumer: Please retain these instructions for future use. Log sets comply with ANSI Z21.11.2 Unvented Heaters and also comply with ANSI Z21.60 Decorative Vented Appliances for Solid Fuel Burning Fireplaces. State or local codes may only allow operation of log sets in a vented configuration. Check your state or local codes. WARNING: If not installed, operated and maintained in accordance with the manufacturer's instructions, this product could expose you to substances in fuel or from fuel combus

7. Log placement is completed. Apply loose material (glowing embers) per appropriate Installation Instructions and Owner's Manual. Replacement of loose material (glowing embers) must be purchased from Empire Comfort Systems, Inc. Application of excess loose material (glowing embers) may adversely affect performance of the heater. WARNING: All previously applied loose material must be removed prior to reapplication. Replacement Loose Material (glowing embers) Part Number LS-18FA(C, O, S) 15999 LS

Burning candles while the log set is operating magnifies the problem. It should be noted that candles, in general, produce soot. The amount of time burned and the quantity of candles burned will determine the amount of soot produced and deposited. Make Owners Aware of Proper Log Set Operation Properly installed and properly maintained log sets do not deposit soot on the logs. If users see soot appear on a log, call for service. Do not continue to operate the log set. Sunken Fireplace If installi

Page 715997-0-0903 LS-30FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). LS-30FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). PARTS LIST & PARTS VIEW PARTS LIST & PARTS VIEW Attention: When ordering parts, it is very important that part number and description of part coincide. Index PartIndex Part No. Number Description No. Number Description FLAME ART

4 LS-18FA(C,O,S)-1 Photos ............................................................................................................................. 5 LS-24FA(C,O,S)-1 Photos ............................................................................................................................. 6 LS-30FA(C,O,S)-1 Photos ............................................................................................................................. 7 Parts List & Parts View ..................

Page 4 15997-0-0903 Do not cover any large rear ports with LS-18FA(C,O,S)-1 PHOTOS Photo 4Photo 3Photo 1 Photo 2loose material (glowing embers). 15997-0-0903 Page 5 Page 6 15997-0-0903 LS-24FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). LS-24FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Photo 1 Photo 2Do not cover any large rear ports withloose material (glowing embers). Page 715997-0-0903 LS-30FA(C,O,S)-1 PHOTOS Photo 3 Photo 4 Phot

4. Place front right (#4) log onto two (2) right, front pins on burner pan. 5. Place front (#5) log in front of burner pan. 6. Compare the completed log installation with the appropriate photo from pages 5 through 7. Review previous steps to make any necessary adjustments. 7. Log placement is completed. Apply loose material (glowing embers) per appropriate Installation Instructions and Owner's Manual. Replacement of loose material (glowing embers) must be purchased from Empire Comfort Systems, I

GENERAL INFORMATION Qualified Installing Agency Installation and replacement of gas piping, gas utilization equipment or accessories and repair and servicing of equipment shall be performed only by a qualified agency. The term "qualified agency" means any individual, firm, corporation, or company that either in person or through a representative is engaged in and is responsible for (a) the installation, testing, or replacement of gas piping or (b) the connection, installation, testing, repair, o

WARNING: Do not allow fans to blow directly into the fireplace. Avoid any drafts that alter burner flame patterns. WARNING: Do not use a blower insert, heat exchanger insert or other accessory not approved for use with this heater. Candles Avoid the use of scented or decorative candles while the fireplace is in operation. Candles produce a residue in the air that creates a soot like substance. Burning candles while the fireplace is operating magnifies the problem. It should be noted that candles