Login:
Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Anleitung Louisville Tin and Stove, modell WOW254

Hersteller: Louisville Tin and Stove
Dateigröße: 731.33 kb
Dateiname: 98ee4c4d-7c9d-4db7-a115-f5e151c2305d.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


• Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions. • If you cannot reach your gas supplier, call the fire department. - INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER, SERVICE AGENCY OR THE GAS SUPPLIER. WARNING: If the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. FAN-TYPE, DIRECT-VENT THROUGH-THE-WALL GAS HEATER INSTALLATION AND OPERATING INSTRUCTIONS R P/N 64920 / DECEMBER 2006 R This appliance must be connected to an electrical ground. WARNING: CONNECT TO 115V ELECTRICAL POWER SUPPLY. DO NOT CONNECT TO 220V POWER SUPPLY. MODEL NUMBERS NAT. GAS L.P. GAS WOW253 WOW254 WOW403 WOW404 NOTE: Obstruction in the vent exhaust tube or air intake tube due to insects, small animals, debris, etc. will prevent the heater from operating but DOES NOT constitute a warranty issue. This unit is for residential installation only and is not approved for greenhouses, or environments involving dusty, wet, corrosive, or explosive conditions. Installation and usage other than residential applications will invalidate the warranty and may create unsafe conditions resulting in property damage, personal injury or loss of life. WARNING: Operation of this furnace without the factory installed vent system could result in Carbon Monoxide (CO) poisoning and possible death. For your safety, this furnace and the vent system must be inspected before initial use and at least annually by a qualified service person. This appliance may be installed in an aftermarket, permanently located, manufactured home (USA only) or mobile home, where not prohibited by local codes. This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used. Installation, maintenance, service, troubleshooting and repairs must be performed by a qualified service agency. MR./MRS. HOMEOWNER, DO NOT attempt any of these procedures yourself as this could expose you to property damage, personal injury, or loss of life and will invalidate all warranties. INSTALLER: Leave this manual with the appliance. CONSUMER: Retain this manual for future reference. Page 2 INTRODUCTION THIS IS A GAS-FIRED, DRAFT INDUCED, POWER DEPENDENT, DIRECT VENT WALL FURNACE; THAT WILL OPERATE SAFELY AND PROVIDE AN EFFICIENT SOURCE OF HEAT WHEN INSTALLED, OPERATED AND MAINTAINED AS RECOMMENDED IN THESE INSTALLATION AND OPERATING INSTRUCTIONS, LOCAL CODES AND THE LATEST EDITION OF ANSI Z223.1/NFPA54 OR IN CANADA CSA B149.1. READ THESE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING, SERVICING, OR USING THE APPLIANCE. IF YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS CONSULT LOCAL AUTHORITIES, OTHER QUALIFIED INSTALLERS, SERVICE AGENCIES, THE GAS SUPPLIER OR THE MANUFACTURER. SPECIFICATIONS AND DIMENSIONS Your Direct Vent Wall Furnace is shipped complete in one carton. This carton contains the furnace, installation and operating instructions, ball-valve w/flex connector, wall thermostat, 20’ wire, insulated staples, window enclosure panels, caulking, weather stripping, and support brackets. The State of Massachusetts requires that installation and service of a gas appliance be performed by a plumber or gas fitter licensed in the Commonwealth of Massachusetts. For bedroom window installation, the State of Massachusetts requires two or more operable windows in the bedroom that are in compliance with 780CMR, Massachusetts Building Code. CABINET MODEL INPUT GAS TYPE MAX. WALL MIN. WALL NO. BTU/HR. WIDTH DEPTH HEIGHT CONN. GAS Thickness Thickness WOW253 20,000 BTU 14-3/8” 28-3/16” 17-1/8” 3/8” NAT. 18” 4” 365 mm 716 mm 435 mm 458 mm 102 mm WOW254 20,000 BTU 14-3/8” 28-3/16” 17-1/8” 3/8” L.P. 18” 4” 365 mm 716 mm 435 mm 458 mm 102 mm WOW403 40,000 BTU 25” 22” 17-1/8” 3/8” NAT. 18” 4” 635 mm 559 mm 435 mm 458 mm 102 mm WOW404 40,000 BTU 25” 22” 17-1/8” 3/8” L.P. 18” 4” 635 mm 559 mm 435 mm 458 mm 102 mm Introduction……………………………..... 2 Specifications and Dimensions………...….. 2 Safety Rules…………………………….. 3 Location................................................... 5 Clearances………………………………. 6 Installation………………………………. 5 - 11 Lighting Instructions……………………... 12 Proper Burner Flame................................. 13 Burner Orifice........................................... 13 Gas Conversion......................................... 14 Wiring Diagram…………………………... 15 Sequence of Operation............................... 16 Maintenance Instructions............................. 17 Removing Main Burner..............................18 - 19 Removing Combustion Tube Assembly.......20 - 21 Trouble Shooting…………………..…... 22 - 23 Parts Drawing…………………………...25 - 26 Parts List………………………………...25 - 28 Warranty………………………………..... 29 CONTENTS SAFETY RULES The Direct Vent Gas Wall/Window...

Dieses Handbuch ist für folgende Modelle:
Gas Heizthermen - WOW403 (731.33 kb)
Gas Heizthermen - WOW253 (731.33 kb)
Gas Heizthermen - WOW404 (731.33 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien