Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1 i- —i Front component 2+ LFE (Low Frequency Centre component 1 Effect) component 1 **The letters in the programme format display indicate the following sound components: L: Front (left) R: Front (right) C: Centre LS: Rear (left) RS: Rear (right) S: Rear (monaural): The rear component of the Dolby Surround processed signal and the Dolby Digital signal LFE: Low Frequency Effect signal SG • TVS STANDARD TV Virtual Surround Settings (tvs) rn When you connect a stereo TV or 2 front speakers, TVS (TV Virtual Surround) lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. TVS was developed by Sony to produce surround sound for home use using just a stereo TV. If the player is set up to output the signal from the DIGITAL OUT (COAXIAL or OPTICAL) jack, the surround effect will only be heard when “DOLBY DIGITAL” is set to “D-PCM” and “MPEG” is set to “PCM” in “AUDIO SETUP” (page 67). ® o O © © © © © © © © © © © o o © o o OOC» Q-© O O ©-©0-0 SUR To cancel the setting Select “OFF” in step 2. ♦TVS DYNAMIC Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV ♦TVS WIDE Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV 1 Press SUR during playback. The following display appears. 1» «□»! TVS DYNAMIC 1 2 Press SUR repeatedly to select one of the TVS sounds. See the following explanations given for each item. • TVS DYNAMIC • TVS WIDE • TVS NIGHT ♦TVS NIGHT Large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected. This feature is useful when you want to hear the dialogue and enjoy the surround sound effects of “TVS WIDE” at low volume. ♦TVS STANDARD Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. Use this setting when you want to use TVS with 2 separate speakers. continued 51 Sound Adjustments L □ L: Front speaker (left) R: Front speaker (right) : Virtual speaker z Hint You can also select “TVS” from the Control Menu (page 12). Notes When the playing signal does not contain a signal for the rear speakers, the surround effects will be difficult to hear. When you select one of the TVS modes, turn off the surround setting of the connected TV or amplifier (receiver). Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings. Not all discs will respond to the “TVS NIGHT” function in the same way. When you use the DIGITAL OUT (COAXIAL or OPTICAL) jack to listen to MPEG audio signals and set “MPEG” in “AUDIO SETUP” to “MPEG”, no sound will come from your speakers if you select one of the TVS modes. 52 Enjoying Movies Displaying the Subtitles EM3 UMM Changing the Angles DVD-V If various angles (multi-angles) for a scene are recorded on the DVD VIDEO, “Qi ” appears in the front panel display. This means that you can change the viewing angle. a 1 Press £3i (angle) during playback. The number of the angle appears on the display. 1» 12 1 2 Press Qi (angle) repeatedly to select the angle number. The scene changes to the selected angle. z Hint You can also select “ANGLE” from the Control Menu (page 12). Note Depending on the DVD VIDEO, you may not be able to change the angles even if multi-angles are recorded on the DVD VIDEO. ® o O © © © © © © © © 0 (a) ® O Q ® Q Q o o *o ©-© o o ©-©0-0 If subtitles are recorded on the discs, you can change the subtitles or turn them on and off whenever you want while playing a DVD. ® o O © © © © © © © Q © © © O o © o o c èoo Q-Q o o 0-0 0-0 1 Press Q (subtitle) during playback. The following display appears. 1 OH:ENGLISH I 2 Press 0 (subtitle) repeatedly to select the setting. ♦ When playing a DVD VIDEO Select the language. Depending on the DVD VIDEO, the choice of language varies. When 4 digits are displayed, they indicate a language code. See “Language Code List” on page 75 for the language the code represents. ♦ When playing a DVD-RW Select “ON.” To turn off the subtitles Select “OFF” in step 2. z Hint You can also select “SUBTITLE” from the Control Menu (page 12). Note Depending on the DVD VIDEO, you may not be able to change the subtitles even if multilingual subtitles are recorded on it. You also may not be able to...