Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If plug does not fit fully into the wall outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way. S Do not attempt to repair unit. Inspect the insulation and connectors on the powerhead and 2 extension cord before each use. If there is any damage, do not use until damage is repaired by your authorized service dealer. S Do not pull or carry by cord; do not use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. S Do not use the powerhead if the switch does not turn the unit on and off properly. Have the unit repaired by your authorized service dealer. S Keep the extension cord clear of operator and obstacles at all times. Do not expose cords to heat, oil, water, or sharp edges. S Avoid any body contact with any grounded conductor, such as metal fences, or pipes, to avoid the possibility of electric shock. Don’t handle plug or unit with wet hands. S Do not use with damaged cord or plug. If powerhead is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to your authorized service for repair. S Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit or outlet to be used for the powerhead. Receptacles are available having built-in GFCI protection and may be used for this measure of safety. Your powerhead should be double insulated to help protect against electric shock. Double insulation construction consists of two separate “layers” of electrical insulation instead of grounding. Tools and appliances built with a double insulation system are not intended to be grounded. Safety precautions must be observed when operating any electrical tool. The double insulation system only provides added protection against injury resulting from an internal electrical insulation failure. WARNING: All repairs to an electric powerhead, including housing, switch, motor, etc., must be diagnosed and repaired by qualified service personnel. Replacement parts for a double insulated appliance must be identical to the parts they replace. A double insulated appliance is marked with the words “double insulation” or “double insulated”. The symbol (square within a square) may also be marked on the appliance. Failure to have the unit repaired by your authorized service dealer can cause the double insulation construction to become ineffective and result in serious injury. UNIT/MAINTENANCE SAFETY WARNING: Disconnect powerhead spark plug (or disconnect powerhead from power source) before performing maintenance. S Maintain unit according to recommended procedures. S Throw away blades that are bent, warped, cracked, broken, or damaged in any other way. Replace parts that are cracked, chipped, or damaged before using the unit. S Use only recommended Poulan PRO! parts and accessories. Never use wire, wire rope, string, flailing devices, etc. S Be sure blade stops turning when engine idles (see CARBURETOR ADJUSTMENTS section of powerhead manual). S Remove the blade before making carburetor adjustments. Hold the unit by hand. Do not make carburetor adjustments from the blade side of the unit. S Keep others away when making carburetor adjustments. S Never start the unit with the clutch housing removed. The clutch can fly off and cause serious injury. S Have all maintenance and service not explained in this manual performed by an authorized service dealer. S If blade strikes a foreign object, follow these steps: stop unit and disconnect spark plug wire (or disconnect from power source), inspect for damage, and repair any damage before resuming operation of the unit. EDGING SAFETY WARNING: Inspect the area to be edged before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown by the blade or can wrap around the shaft. S Keep others including children, animals, bystanders, and helpers at least 50 feet (15 meters) away. Stop the unit immediately if you are approached. S Hold the unit firmly with both hands. S Keep firm footing and balance. Do not overreach or stand on unstable surfaces. S Always keep the wheel in contact with the ground. S Keep all parts of your body away from the blade and muffler. S Always push the unit slowly over the ground. Stay alert for uneven sidewalks, holes in the terrain, large roots, etc. S Do not force the unit. Use only for jobs explained in this manual. Use only for edging. Do not abuse unit. Do not use in rain or wet location...