Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Kenwood Dateigröße: 1.17 mb Dateiname: Unterrichtssprache:

Adjust the clock before setting the timer. 1Make preparations for the play (recording). OTo listen to radio The station should be preset prior to the above. ¶ ............................................................... . OTo listen to CD Insert a disc. (Program playback is not possible.) ............................................................... . OTo listen to tape Set a tape into deck. ............................................................... . OListening to MD Set a disc into the MD recorder. ........................... . OFor recording Make prepa rations for re cording.• (Steps 1 to 4) For recording and playback with an MD recorder (DM-SE7), also refer to the instruction manual enclosed with the DM-SE7. 2Adjust the listening volume. volume control pure A OFor recording of broadcasts, muting becomes ON automatically when the power is switched on by the timer. 3 Set the on/standby switch to standby position. Application section on/standby Select a program No.4 OThe “PROG.” indicator lights. OWhen a timer reservation already has been made, the contents will change to the new settings. R-SE7 2 1During display of program content band enter 1))) : PROG. 47Timer operation Adjust the clock before setting the timer. 47Timer operation Adjust the clock before setting the timer. R-SE7/DP-SE7/X-SE7 (En) 5Enter the ON time. OAfter entering the “hour” with the procedure in 1 and 2, enter the “minute” using the same procedure. R-SE7 Enter the OFF time.6 OAfter entering the “hour” with the procedure in 1 and 2, enter the “minute” using the same procedure. OIf you commit a mistake, restart from step 4. R-SE7 Make the desired reservation.7 OIf you commit a mistake, restart from step 4. 21volume control pure A enter To decrease the figure To increase the figure AMPROG. 21volume control pure A enter To decrease the figure To increase the figure AMPROG. Enter it. Select the preset station No. Select the source to be played. Enter it. TUNER CD TAPE MD (DM-SE7) AUX PLAY ....... Timer play AI ............ Timer play with gradually increasing volume REC CCC 1Select the mode. 2Select the input source. 3Select the broadcast station (only when TUNER is selected). Select “PLAY” or “AI”. Enter it. PROG.TUNER PROG.15 For timer playback or AI timer playback Timer recording of radio broadcasts PROG. PLAY volume control pure A enter volume control pure A enter volume control pure A enter Application PLAY AI REC Select “REC”. Enter it. C Select the preset station No. 3Select the broadcast station (only when TUNER is selected). Enter it. 1Select the mode. 4Select the recording unit. TAPE MD (DM-SE7) volume control pure A enter Select the source to be played. Enter it. 2Select the input source. TUNER AUXC volume control pure A enter Enter it. C volume control pure A enter C volume control pure A enter Continued on next page 48 Timer operationAdjust the clock before setting the timer. 48 Timer operationAdjust the clock before setting the timer. R-SE7/DP-SE7/X-SE7 (En) 8Set the program. OThe “PROG.” indicator lights. R-SE7 tuning 1)) :5 PROG. OThe timer does not operate when no program is set. This completes the program timer reservation. Please refer to the following item for confirmation, changes, etc. Ensure that the power is OFF. Check the reservation content. band When timer operation is not required Extinguish the program indication. tuning To set the same timer program again Light the program indication. tuning NoteNote The reservation contents cannot be cleared. The contents are cleared only when they are changed. OThe reserved contents will be displayed for 3 seconds per item. After this, the previous display content appears again. To change the reserved contents Restart the procedure of “Timer programming” from the beginning. Goes off R-SE7 1)) :5 OThe reservation contents are held in memory. R-SE7 1)) :5 PROG. Lights OAlso prepare the disc or tape and adjust the listening volume. Application section 49Important Items 49Important Items R-SE7/DP-SE7/X-SE7 (En) Handling of discs and tapes Disc handling precautions Handling Hold compact discs so that you Cleaning do not touch the playing surface. If fingerprints or foreign matter be come attached to the disc, lightly wipe ODo not attach paper or tape to the disc with a soft cotton cloth (or Label side either the playing side or the similar) from the center of the disc Playing side label side of compact discs. outwards in a radial manner. OThe paste left on the label sur-Sticker face after a sticker has been peeled off is a factor which Storage may cause malfunction. When a disc is not to be played for a Sticky paste If the surface is sticky due to long period of time, remove it from the remaining paste, be sure to CD player and store it in its case. clean it with alcohol before use. ..................................................................................................................................................................................................

Herunterladen

Geben Sie zwei Ziffern: