Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Exmark Dateigröße: 809.13 kb Dateiname: F8208301en.pdf Unterrichtssprache:

NOTE: All information, illustrations, and specifications contained in this manual are based on the latest product information available at the time of printing. We reserve the right to make changes at any time without notice. Delivery Inspection Upon delivery, visually inspect crate, protective cover, and unit for any visible shipping damage. If the crate, protective cover, or unit is damaged or signs of possible damage are evident, have the carrier note the condition on the shipping papers before the shipping receipt is signed, or advise the carrier of the condition as soon as it is discovered. Remove the crate and protective cover as soon after delivery as possible. If any damage is discovered upon removal of the crate and/or protective cover, advise the carrier and file a written claim immediately. Nameplate Location The nameplate is located at the rear of the machine and inside door. Always provide the machine’s serial number and model number when ordering parts or when seeking technical assistance. Refer to Figure 1. Figure 1 CHM2233N 1 Nameplate 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8208301 Introduction Model Number Familiarization Guide Sample Model Number: *CN040GC2OU1D01 *C Product Family N Agency Approval 040 Washer-Extractor Capacity (pounds dry weight of laundry) G Type of Electrical Control C Actuation (C = Coin drop) 2 Washer-Extractor Speed Capability (2 = 2 speed) O Electrical Characteristics U Panel Type 1 Design Series D Heat Feature (D = Direct Steam) 01 Option Identification (varies from machine to machine) * Denotes Brand CHM2286N *CN040GC2OUID01 00000000000 208 – 240 3 Hz Phase Supply Water: BAR Number of wires : FLA : amps 3Circuit Breaker Size : amps 60 3 Serial No. Model No. Voltage 40 30 - 85 psi, 2 - 5.7 Max. Load : Schematic : KG 18.2LB EXAMPLE OF NAMEPLATE Figure 2 F8208301 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Introduction Replacement Parts If literature or replacement parts are required, contact the source from which the machine was purchased or contact Alliance Laundry Systems at (920) 748-3950 for the name and address of the nearest authorized parts distributor. Customer Service For technical assistance, contact your local distributor or contact: Alliance Laundry Systems Shepard Street P.O. Box 990 Ripon, Wisconsin 54971-0990 U.S.A. Phone: +1 (920) 748-3121 +32564120 54 Wevelgem, Belgium © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8208301 Specifications and Dimensions 2 Speed Models Specification 20 30 40 60 Weight and Shipping Information Net weight, lbs. (kg) 387 (176) 489 (222) 692 (314) 812 (368) Domestic shipping weight, lbs. (kg) 420 (191) 530 (240) 734 (333) 854 (387) Domestic shipping volume, ft.3 (m3) 30.5 (.86) 40.75 (1.15) 50 (1.42) 64 (1.81) Export shipping weight, lbs. (kg) 475 (215) 593 (269) 816 (370) 948 (430) Export shipping volume, ft.3 (m3) 36.2 (1.03) 49.9 (1.41) 60 (1.70) 75.8 (2.15) Wash Cylinder Information Cylinder diameter, in. (mm) 21 (533) 24 (610) 26.25 (667) 30 (762) Cylinder depth, in. (mm) 13.75 (349) 16 (406) 20.25 (514) 22 (559) Cylinder volume, ft.3 (l) 2.76 (78.1) 4.19 (118.6) 6.34 (180) 9.00 (255) Perforation size, in. (mm) 0.188 (4.76) 0.188 (4.76) 0.188 (4.76) 0.188 (4.76) Perforation open area, % 17 23 17.5 18 F8208301 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Specifications and Dimensions 2 Speed Models (Continued) Specification 20 30 40 60 Door Opening Information Door opening diameter, in. (mm) 11.63 (295) 14.34 (364) 16.25 (413) 16.25 (413) Height of door bottom above floor, in. (mm) 14.38 (365) 14 (356) 14.5 (368) 15 (381) Height of door opening above floor, in. (mm) 17.19 (437) 17 (431) 19 (483) 18.5 (470) Estimated Building Heat Load HVAC load, BTU/hr. (Kcal./hr.) 400 (101) 450 (113) 510 (129) 750 (189) Power Consumption Average power used per cycle, kW-hr. No load .06 .13 .196 .25 Sheets .10 .14 .195 .26 Towels .11 .16 .213 .33 Drive Train Information Number of motors in drive train 1 1 1 1 Wash/reverse power, HP (kW) 0.15 (0.11) 0.24 (0.18) 0.40 (0.30) 0.55 (0.41) High extract power, HP (kW) 0.74 (0.55) 1.34 (1.00) 1.8 (1.3) 2.7 (2.01) Cylinder Speeds Wash/reverse speed, RPM 57 49 51 44 High extract speed, RPM 528 464 491 469 Centrifugal Force Data Wash/reverse centrifugal force, G 0.9 0.8 0.8 0.9 High extract centrifugal force, G 80.3 72.1 78.1 85.4 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8208301 Specifications and Dimensions 2 Speed Models (Continued) Specification 20 30 40 60 Direct Steam Heating (Optional) Steam inlet connection size, NPT N/A N/A 1/2 1/2 Number of steam inlets N/A N/A 1 1 Steam required to raise bath water temperature, 10°F (10°C), lbs. (kg) LOW N/A N/A 2.09 (0.84) 3.6 (0.895) MED N/A N/A 2.40 (1.15) 4.4 (1.384) HIGH N/A N/A 2.84 (1.48) 5.5 (1.916) Average steam use per cycle, bhp (kg) N/A 0.73 (6.9) 1.43 (12.2) 2.32 (15.4) Electrical Heating ...

Herunterladen

Geben Sie zwei Ziffern: