Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Frymaster Dateigröße: 377.61 kb Dateiname: 93f65d10-21fe-48db-9ff3-55bc1f00f256.pdf Unterrichtssprache:

Belshaw cannot pay for shipping damage, because the freight company has accepted the machine from Belshaw in good condition, and is responsible for its safe delivery. For your protection, inspect the machine to see that no parts are bent, scratched, or otherwise damaged. If any damage has occurred in shipping, file a freight claim with the shipping company immediately. IMPORTANT Keep this manual for future reference. To unpack the fryer and transport it to the workstation: 1. Use a fork lift to transport the shipping crate to the work station. 2. Break down the shipping crate. 3. Remove all the packing materials from the fryer. These include foam, tape, brown paper, plastic, and white protective coating. 4. Position the fryer to allow sufficient space on either end of the machine for any equipment you plan to use with it. EQUIPMENT RECORD Please provide the information below when you correspond with us about your machine. Purchased by _____________________________________________________________________ Installed by ______________________________________________________________________ Date of Installation ________________________________________________________________ Model number ____________________________________________________________________ Serial number 0606 MN-1141EN Belshaw Bros., Inc. 1750 22nd Avenue South Seattle, WA 98144-4590 USA Phone: (206) 322-5474 • Fax: (206) 322-5425 Toll Free: (800) 578-2547 E-mail: service@belshaw.com • Contents Sections 1 Installation 1 Conforming to Codes Selecting a Workstation Unpacking the Fryer Initial Cleaning Assembling the Fryer Installing the Fryer Moving the Fryer 2 Operation 1 1 2 2 2 3 4 5 Taking Safety Precautions 5 Frying Donuts 5 3 Cleaning 8 Removing the Shortening Washing Rinsing Maintenance 8 9 10 11 5 Troubleshooting 17 Appendixes A Pilot Module Checkout A-1 Troubleshooting—General A-4 Troubleshooting the Ignition System A-4 Belshaw Bros., Inc. • 1750 22nd Ave. S. • Seattle, WA 98144 • Phone 206-322-5474 • Fax 206-322-5425 718LCG, 724CG, and 734CG Gas Fryers MN-1141EN B Donut-Making Helps B-1 Tips on Making Quality Cake Donuts B-1 Calculating Correct Water Temperature B-2 Ratios of Plunger Sizes to Donut Weights B-2 Temperature Conversion B-2 C Parts Lists C-1 Limited Warranty Insert Preface The 718LCG, 724CG, and 734CG Gas Fryers are designed to fry cake and yeast-raised donut products. Each must be bolted to a flat, dry floor. The operator should stand opposite the flue stack. The operator must work safely at all times and read this manual and follow its instructions and warnings. A thorough understanding of how to install, maintain, and safely operate the fryer will prevent production delays and injuries Heed the following warnings and all other warnings that appear in this manual: • Make sure the machine is bolted securely to the floor. Doing so will prevent the machine from moving, tipping, or falling, which could cause serious injury. • Never let water and hot shortening come in contact with each other. Moisture causes hot shortening to spatter, which may cause serious burns. • Do not overfill the kettle with shortening. If shortening overflows the kettle, it could cause serious burns or could cause someone to slip on the floor and be seriously injured. • Hot shortening can cause serious burns. Make sure that the system and the shortening are cool before attempting any cleaning, adjustment, disassembly, or repair. • To avoid electrocution or other injury, unplug the machine before attempting any cleaning, adjustment, disassembly, or repair. • To avoid damaging the machine, never use force to assemble, disassemble, operate, clean, or maintain it. • Be careful never to get shortening, water, or other materials on the floor. If anything does get spilled on the floor, mop it up immediately. Materials on the floor can cause people to slip or fall, resulting in serious injury or loss of life. • To prevent unintentional startup and possible fire, unplug the machine if there is a local power outage. When the power is restored, it is safe to plug the machine in again. • To avoid electrocution, make sure that all electrical cords are not frayed or cracked and that they do not pass through any water or shortening. • Make sure that all electrical cords are routed so that no one will trip over them. • Make sure you are aware of the following: This product contains chemicals known to the State of California to cause birth defects or other reproductive harm. Operation, installation and servicing of this product could expose you to carbon monoxide if not adjusted properly. Inhalation of carbon monoxide is known to the State of California to cause birth defects or other reproductive harm. Maintenance and repairs shall only be carried out by a factory representative or qualified service personnel. • LPG/LNG Conversion: Belshaw Bros., Inc. • 1750 22nd Ave. S. • Seattle, WA 98144 • Phone 206-322-5474 • Fax 206-322-5425 718LCG, 724CG, an...

Herunterladen

Geben Sie zwei Ziffern: