Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
1 Press the tab in. 2 Pull the battery holder out. 3 Insert a new battery and slide the battery holder back into the remote control. Insert the battery so that “+” is facing upwards. Notes • Using a battery other than the specified one may result in the battery rupturing. • Dispose of used batteries as specified by the local authorities. • Do not leave the remote control in a very hot and humid place. • Take care that no foreign objects get inside the remote control when you, for example, replace the battery. Basic operations Continued 9 GB • • – Do not recharge the battery. – When the remote control will not be used for a long period of time, remove the battery from the remote control to prevent leaking and corrosion. – Incorrectly inserting, shorting, dismantling, or heating the battery, or throwing it into a fire may cause the battery to rupture or leak. Setting the stand 1 Hold the photo frame tightly and insert the stand straight into the screw hole on the rear panel. 2 Screw the stand into the screw hole firmly until the stand stops turning. Setting to portrait or landscape orientation You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand. 10 GB When the photo frame is placed vertically, the display is also automatically rotated to the portrait orientation. When the photo frame is placed vertically, the display is also automatically rotated to the portrait orientation. Notes • Check whether the stand is stable. If the stand is not set properly, the photo frame may fall over. • The Sony logo does not light up when the photo frame is placed vertically or turned off (DPF-D75/ D85/D95 only). • You can also rotate the image manually (page 32). • A magnet is contained in the space for storing the stand. Do not keep anything that is easily affected by magnetism, such as a cash card or credit card, near the photo frame. If you place the photo frame near a cathode-ray tube television, the colors of the television screen may be affected. To exchange a panel (DPF-E75 only) You can exchange the original panel with an exchangeable panel supplied. 1 Insert a long, thin object such as a pin into the hole next to the space for storing stand on the rear of the photo frame and lift up the front panel. 2 Remove the panel. Basic operations Tip It is easier to turn the stand if you wind or wrap a rubber band tightly around the stand when you remove the stand from the photo frame. Continued 11 GB 3 3 Remote sensor 4 Press the four corners of the exchangeable panel to snap it into the photo frame. Turning the photo frame on When you have already turned on your photo frame by connecting it to the AC power source, skip to the next section. Turning on the power Press 1 (on/standby) on the photo frame or remote control to turn on the power. The standby indicator turns to green from red. The Sony logo on the front panel lights up (DPFD75/ D85/D95 only). Turning off the power Hold 1 (on/standby) on the photo frame or remote control until the power turns off. The standby indicator turns to red from green. Note Do not turn the photo frame off or disconnect the AC adaptor from the photo frame before the standby indicator turns red. Doing so may damage the photo frame. 12 GB Operations in an initial state Operations in an initial state memory card inserted, the initial display below appears on the screen. 1 Press MENU. 2 Press B/b to select the (Settings) tab. Tip You can use the B/b buttons only when the demo mode is not displayed, and the Clock and calendar view mode (page 18) is not selected. 3 Press v/V to select [Date/time Settings] and then press . If the photo frame is not operated for 10 seconds, the demo mode is displayed. If any other button than the power button is pressed, the screen returns to the initial display. First, press MENU during the initial display, and then set the date and time. 4 Adjust the date. 1Press v/V to select [Date], and then press . 2Press B/b to select month, day, and year, and then press v/V to select a value, then press . 5 Adjust the time. 1Press v/V to select [Time] and then press . 2Press B/b to select hour, minute, and second, and then press v/V to select a value, then press . 6 Select the format of the date. 1Press v/V to select [Date Display Order], and then press . 2Press v/V to select a format, and then press . •Y-M-D •M-D-Y •D-M-Y Basic operations Continued 13 GB 7 7 You can set the day that appears on the very left when the calendar is displayed. 1Press v/V to select [First day of the week] and then press . 2Press v/V to select [Sunday] or [Monday] and then press . 8 Select the time display. 1Press v/V to select [12hr/24hr display] and then press . 2Press v/V to select [12 hours] or [24 hours] and then press . 9 Press MENU. The menu screen is closed. Inserting a memory card Insert the memory card firmly into the corresponding slot with its label side facing toward you (when you are facing the back side of the photo frame). The access la...
Dieses Handbuch ist für folgende Modelle:Bilderrahmen - DPF-D85 (4.71 mb)