|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
23 Cleaning .................................................................................................................. 23 Restrictions on duplication ...................................................................................... 23 Disposing of the photo frame .................................................................................. 23 Specifications ................................................................................................. 24 On trademarks and copyrights ................................................................................. 25 5 GB Checking included items Checking included items Digital photo frame (1) Stand (1) Attaching to the screw hole (.page 9) , Remote control (1) Removing the protective sheet (. page 9) , AC adaptor (1) Connecting to the AC power source (.page 11) , Exchangeable panels (3)* Operating Instructions (this manual) (1) CD-ROM (Digital Photo Frame Handbook) (1) Warranty (1) * One of the 3 panels is already attached to the digital photo frame. The supplied CD-ROM contains the Digital Photo Frame Handbook that explains operations and setups of the digital photo frame in detail. To view the handbook, insert the CD-ROM into the computer and double-click the Handbook icon. (To display the handbook, you need Adobe Acrobat Reader. ) 6 GB Identifying the parts x Digital photo frame Identifying the parts x Digital photo frame LCD screen Remote sensor Rear BACK button ENTER button Direction (v/V) buttons Direction (B/b) buttons MENU button VIEW MODE button (.page 14) 1 (on/standby) button Standby indicator USB mini B connector (.page 20) Memory card slot (.page 13) Access lamp Holes for hanging unit on the wall DC IN 5 V jack (.page 11) Stand (.page 9) For your safety 7 GB x Remote control x Remote control VIEW MODE buttons 1 (on/standby) button SLIDE-SHOW ( ) button SINGLE button CLOCK ( ) button INDEX ( ) button MENU button Zoom in ( ) button Direction (B/b/v/V) buttons ENTER ( ) button BACK button Zoom out ( ) button SELECT DEVICE button IMPORT ( ) button ROTATE ( ) button DELETE ( ) button About descriptions in this manual The operations described in this manual are based on remote control operation. When an operation is performed differently, for example, with the remote control and the buttons on the photo frame, it will be explained in a tip. 8 GB Let’s get the photo frame ready Let’s get the photo frame ready l Pull out the protective sheet before use as shown in the figure. Protective sheet Using the remote control Point the top end of the remote control towards the remote sensor on the photo frame. Stand Turn the stand clockwise until the stand stops turning and is firmly attached to the stand socket on the rear panel. You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand. P Notes • If the remote control stops working: Replace the battery (CR2025 lithium battery) with a new one. • When the lithium battery becomes weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion. Replacing procedures: .CD-ROM (Handbook) page 9 P WARNING Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. Let’s get the frame ready 9 GB PNotes • Use screws suitable for the quality of the material of the wall. The screws may be damaged, depending on the type of material used in the wall. Set the screws in a pillar or stud in the wall. • When you want to re-insert the memory card, remove the photo frame from the wall, then eject and re-insert the memory card while the photo frame is placed on a stable surface. • Remove the stand when you hang the photo frame on the wall. • Connect the DC cable of the AC adaptor to the photo frame and hang the photo frame on the wall. Then connect the AC adaptor to the wall outlet. • We take no responsibility for any accidents or damage caused by defects of attachment, misuse, or natural disasters, etc. PNotes • Use screws suitable for the quality of the material of the wall. The screws may be damaged, depending on the type of material used in the wall. Set the screws in a pillar or stud in the wall. • When you want to re-insert the memory card, remove the photo frame from the wall, then eject and re-insert the memory card while the photo frame is placed on a stable surface. • Remove the stand when you hang the photo frame on the wall. • Connect the DC cable of the AC adaptor to the photo frame and hang the photo frame on the wall. Then connect the AC adaptor to the wall outlet. • We take no responsibility for any accidents or damage caused by defects of attachment, misuse, or natural disasters, etc. 1 Prepare screws (not supplied) suitable for the screw holes on the rear panel. 4mm More than 25mm . 5mm 10mm Holes for hanging the unit on the wall 2 Screw the ...