Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• You can change the thumbnail size using [ / ] in the image list. • Any device that is not recognized by the photo frame is shown in gray and you cannot select it. Advanced operations 27 GB 1 Press (DELETE) when an image is displayed on the screen. Tip If using the buttons on the photo frame, press MENU, select the (Editing) tab with B/b, select [Delete] with v/V, and press . 2 Press v/V to select [Delete this image], [Delete multiple images] or [Delete all images] and then press . If you select [Delete this image], the image currently displayed is deleted. Go to step 5. (This item cannot be selected on the slideshow display.) If you select [Delete multiple images], you can select the image you want to delete from the image list. Go to step 3. If you select [Delete all images], the image list is displayed. A check mark is attached to the check box of all the images. Go to step 4. 3 Press B/b/v/V to select the image from the image list to be deleted, and then press . “.” is added to the selected image. If you want to delete multiple images at a time, repeat this step. If you want to clear the selection, select the image and press .“.” disappears from the image. 4 Press MENU. The delete confirmation screen is displayed. 5 Press v/V to select [Yes], and then press . The image is deleted. 6 Press when the confirmation screen is displayed. Notes • Avoid doing the following while an image is being deleted. Doing so may damage the photo frame, memory card, or the data: – Turning off the power – Removing an memory card – Inserting another card • When the message [Cannot delete a protected file.] appears on the screen, the image file was set to “Read Only” on a computer. In this case, connect the photo frame to a computer, and delete this file using the computer. • The total capacity of the internal memory is not equal to the remaining capacity, even immediately after initialization. • If deletion has started, the deleted image cannot be recovered even if you stop deletion. Delete images only after confirming you actually want to delete them. Tip You can change the thumbnail size using [ / ] in the image list. To format the internal memory 1 Press MENU. 2 Press B/b to select the (Settings) tab. 3 Press v/V to select [Initialize], and then press . 4 Press v/V to select [Format internal memory], and then press . The confirmation screen used for initializing the internal memory is displayed. 5 Press v/V to select [Yes], and then press . 28 GB Adjusting image size and orientation Adjusting image size and orientation You can enlarge or reduce an image in single view mode. To enlarge an image, press (zoom in) on the remote control. To reduce an enlarged image, press (zoom out). Each press of the button enlarges the image further. You can enlarge an image to a maximum of 5 times the original scale. You can move an enlarged image up, down, left, and right. To save an enlarged or a reduced image (Crop and save) 1Press MENU while the enlarged or reduced image is displayed. 2Press v/V to select the saving method. If you select [Save as new image], a copy of the image is saved. Proceed to step 3. If you select [Overwrite], the new image overwrites the old image. Proceed to step 5. 3Press v/V to select the device on which to save the image and press . 4Press v/V to select a destination folder and press . 5Press v/V to select [Yes] and press . The image is saved. 6When the confirmation screen appears after you finish saving the image, press . Tip If you move the enlarged image with B/b/v/V and press MENU in step 1, the image is trimmed into the displayed image size and saved. Notes • You cannot overwrite files except for a JPEG file (extension: JPG). • Enlarging an image may reduce the quality depending on the image size. • It is not possible to enlarge an image using the buttons on the photo frame. Rotating an image You can rotate an image during single view mode. Operate from the menu of the photo frame 1 Press MENU in single view mode. 2 Press B/b to select the (Editing) tab. 3 Press v/V to select [Rotate], and then press . Advanced operations 4 Press v/V to select the direction to rotate and then press . • : Rotates the image 90 degrees clockwise. • : Rotates the image 90 degrees counterclockwise. 5 Press v/V to select [OK] and then press . Tips • You can also rotate an image with (ROTATE) on the remote control. The image rotates 90 degrees counterclockwise every time you press the button. • For an internal memory image, image rotation data will be retained even after the power is turned off. • You can rotate the image of the index image display. 29 GB Changing the settings of the auto power on/off function Changing the settings of the auto power on/off function 1 Press MENU. 2 Press B/b to select the (Settings) tab. 3 Press v/V to select [Auto Power ON/ OFF], and press . The screen used for setting a value for [Auto Power ON/OFF] is displayed. You can set the auto power on/off function finely in one minute increments.. 1Sel...
Dieses Handbuch ist für folgende Modelle:Bilderrahmen - DPF-E73 (4.11 mb)