Stimmen - , Durchschnittliche Bewertung:
(
)
)
Hersteller: Kodak
Dateigröße: 3.93 mb
Dateiname:
Unterrichtssprache:
Das Dokument wird geladen, bitte warten
 |
Das Dokument wird geladen, bitte warten
Anleitung Zusammenfassung
For best results, place the camera on a tripod or steady surface. 1 Press the Display button until tools appear at the top of the LCD. 2 Press and to choose the Self-timer/Burst icon, then press OK. 3 Press to choose a self-timer setting, then press OK. Self-timer setting Description 10 Seconds A picture is taken after a 10-second delay (so you have time to get into the scene). 10 2 Seconds 2 A picture is taken after a 2-second delay. 2 Picture The first picture is taken after a 10-second Timer delay. A second picture is taken 8 seconds later. 2x 4 Compose the scene. Press the Shutter button halfway, then completely down. The camera takes the picture/pictures after the delay. You can use the same procedure to take a video (after a 2- or 10-second delay). Do more with your camera Use modes and effects 1 Press the Mode button . 2 Press to choose: ¦ Smart Capture: For general picture taking. ¦ Film Effects: Apply picture/video effects. Mode ¦ Scene modes: (See table below.) Choose the Scene mode that matches your picture-taking situation–for the best possible pictures. ¦ Photobooth: Like a classic, vintage photobooth, the camera uses a self-timer to take 4 pictures, then combines them into a single strip. (Scroll to access this option.) Scene mode For Program Access to advanced settings. See page 21. Portrait Full-frame portraits of people. Sport Action pictures. Landscape Distant scenes. Close-up Close range. Use available light, if possible. Do more with your camera Scene mode For Sunset Subjects at dusk. Backlight Subjects in shadow or “backlit.” Candle Light Subjects illuminated by candle light. Children Action pictures of children in bright light. Bright Bright beach or snow scenes. Fireworks Fireworks. For best results, place the camera on a steady surface or tripod. Self-Portrait Close-ups of yourself. Minimizes red-eye. Night Portrait Reduces red-eye of people in night scenes or low-light. Night Distant scenery at night. Flash does not fire. Landscape High ISO People indoors, in low-light scenes. Blur Reducing blur caused by camera shake or subject motion. Reduction Long Time Conveying a sense of motion. The settings are: None, 0.5 Exposure Sec., 1.0 Sec., 2.0 Sec., 4.0 Sec., 8.0 sec. Panorama “Stitching” 2 or 3 pictures into 1 panoramic scene. R-L, L-R See the Extended user guide See How-To videos Do more with your camera Use Program mode for more control 1 Press the Mode button , choose Scene mode, and press OK. Choose Program, then press OK. 2 Press to choose a setting, then press OK. Press to change a setting, then press OK to save it. Self- Exposure White Focus More ISO timer comp. Balance Zone tools Self-timer Include yourself in a picture (page 18). Burst takes a /Burst series of pictures in rapid succession. Exposure Adjust the exposure. If a scene is too light, decrease the Compen-setting; if it’s dark, increase the setting. sation ISO Adjust the camera’s sensitivity to light. Higher ISO indicates greater sensitivity. NOTE: A higher ISO may produce unwanted “noise” in a picture. White To make picture color more accurate, choose the setting Balance that matches the current lighting. Focus Choose Multi-Zone, Center-Zone, Face Priority. Zone Focus Choose Auto or Infinity. Mode 2 2 Solve camera problems Go to for the Extended user guide, firmware updates, and answers to your questions. Status Solution Camera does not ¦ Make sure the battery is installed turn on/off or function correctly and charged (see page 3). LCD is too dark. ¦ Adjust the LCD Brightness setting in the Settings menu (see page 11). Short battery life ¦ Make sure the battery is charged (see page 3). ¦ Limit the time you review pictures/videos on the camera LCD. ¦ Purchase a spare battery at Flash does not fire ¦ The flash does not fire in all modes. Change modes as needed (see page 17). Computer does not communicate with the camera ¦ Turn the camera off, then back on. ¦ Make sure the battery is installed correctly and charged (see page 3). ¦ Make sure a KODAK Camera USB Cable, Micro B / 5-Pin is connected to the camera and the computer (see page 15). Then turn on the camera. ¦ See KODAK Software Downloads at 3 3 Appendix CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. Refer servicing to qualified service personnel. KODAK AC Adapters and Battery Chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support. ¦ The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For appro...