Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
To cancel picture effect Press PICTURE EFFECT repeatedly until the indicator on the LCD screen goes out. When you turn the power off or set PLAY/ CAMERA to PLAY, the picture effect is automatically cancelled. 31-EN Advanced OUsing various functions for recording Using the PROGRAM AE function You can select one of five PROGRAM AE (Auto Exposure) modes to suit your shooting situation, referring to the following. Press PROGRAM AE repeatedly to select the desired PROGRAM AE mode. aSoft Portrait mode Creates a soft background for subjects such as people or flowers, and faithfully reproduces skin color. ASports Lesson mode For recording fast-moving subjects such as in tennis or golf games. Beach & Ski mode For people or faces in strong light or reflected light, such as at a beach in midsummer or on a ski slope. Sunset & Moon mode For recording subjects in dark environments such as sunsets, fireworks, neon signs, or general night views. Landscape mode For distant subjects such as mountains or when recording a subject behind an obstacle such as a window or screen. Panfocus mode For recording close or distant subjects quickly and simply. Or, for recording with flash in a dark place where it is hard to bring the camera into focus. To cancel PROGRAM AE Press PROGRAM AE repeatedly until the indicator on the LCD screen goes out. Notes on focus settings • You cannot take close-ups in Sports Lesson and Beach & Ski modes. • You can focus only on distance subjects in Sunset & Moon and Landscape modes. • In Panfocus mode, the zoom position and focus are fixed. 32-EN Changing the lithium battery in the camera When the lithium battery becomes weak or dead, the “I” indicator flashes on the LCD screen. In this case, replace the battery with a Sony CR2025 or Duracell DL-2025 lithium battery. Use of any other battery may present a risk of fire or explosion. When installing the lithium battery, keep the battery pack attached. Otherwise, you will need to reset the date and time retained by the lithium battery. 1 Slide the lid of the lithium battery compartment and open it. 2 Push the lithium battery once and push it out from the holder. 3 Install the lithium battery with the positive (+) side facing out. 4 Close the lid. WARNING The battery may explode if mistreated. Do not recharge, disassemble, or dispose of in fire. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. Additional 33-EN Precautions On cleaning Cleaning the LCD screen Wipe the screen surface with a LCD cleaning kit (not supplied) to remove fingerprints, dust, etc. Cleaning the camera surface Clean the camera surface with a soft cloth slightly moistened with water. Do not use any type of solvent such as alcohol or benzene as it may mar the finish of the casing. Using the camera on a sandy beach or in a dusty place Do not let sand get into the camera. Sand or dust may cause the unit to malfunction, and sometimes this malfunction cannot be repaired. Concerning floppy disks To protect data recorded on floppy disk, note the following: • Avoid storing floppy disks near magnets or magnetic fields such as those of speakers and televisions, permanent erasure of disk data may result. • Avoid storing floppy disks in areas subject to direct sunlight or sources of high temperature, such as a heating device. Floppy disk warping or damage may result, rendering the disk useless. • Avoid contact with the disk’s surface by opening the disk shutter plate. If the disk’s surface becomes blemished, data may be rendered unreadable. • Avoid getting liquids on the floppy disk. • Be sure to use a floppy disk case to ensure protection of important data. • Use only a 2HD type disk head cleaner when cleaning the disk drive. •Even when you use a 3.5 inch 2HD floppy disk, image data may not be recorded and/or displayed depending on the using environment. In this case, use other brand disks. 34-EN Operational temperature recommendations This camera’s operational temperature is between 32°F to +104°F (0°C to +40°C). Do not use this camera in extreme climates outside the operational temperature range. Moisture condensation If the camera is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense inside or outside the camera. Should this occur, the camera will not operate properly. In this case, remove the floppy disk, turn off the camera, and wait about an hour for the moisture to evaporate. To prevent moisture condensation When bringing the camera from a cold place to a warm place, put the camera in a plastic bag and allow it to adapt to room conditions over period of time. 1 Be sure to tightly seal the plastic bag containing the camera. 2 Remove the bag when the air temperature inside it has reached the temperature surrounding it (about 1 hour). Notes on lithium battery •Keep the lithium battery out of the r...