Stimmen - 5, Durchschnittliche Bewertung: 4.6
(
)
)
|
Anleitung Zusammenfassung
Use the blank at the bottom of this column to copy this down before you set up your machine. Note: The IC label and ID label do not contain serial number information. Close up, the bar code label looks something like this, but with a different set of numbers: Please copy down your machine’s serial number below for future reference, and note the machine’s model number: My machine’s serial number (scanner): ________________________________ My machine’s serial number (printer): ________________________________ My machine’s model number: Muratec MFX-2530 Bar code label for scanner Bar code label for printer Welcome … Trademarks Muratec, the Muratec logo and trademarks of Muratec America, Inc. ENERGY STAR is a registered mark of the Agency. Copyright Copyright © 2001 by Muratec America, Inc, All rights reserved. As an ENERGY STAR ® partner, Muratec America, Inc., has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. Energy saving Your machine can save the energy with its Energy Saving Mode. In the Energy Saving Mode the printer will not use its fusing lamp. If your machine receives a fax message or if any key is pressed your machine will automatically wake up. The time for the machine to enter the Energy saving mode can be selected from 1 to 240 minutes. For details, see “EasyStart, ” page 1.17. Super G3 is an extension of Group 3 fax technology standards, allowing the use of high-speed ITU- TV.34 modems for 33.6 Kbps transmission and high-speed protocols for rapid handshaking. JBIG — Joint Bi-level Image experts Group, the new ITU- T standard image data compression method. As JBIG compresses the data more efficiently than MMR, it is especially effective when transmitting halftone (grayscale) image document. This manual and any updates to it can be found online at Go to the “Products” section of this site, then click on “ MFX-2530” Regulatory United States of America Federal Communications Commission ( FCC) information Ringer Equivalence Number ( RENs): AC REN, 2.2B; DC REN, 0.3. This facsimile machine has been tested and found to comply with the limits for a A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes interference in radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This equipment complies with Part 68 of the FCC rules. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and REN for this equipment. If so requested, you must provide this information to the telephone company. An FCC-compliant telephone cord and modular plug are provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part-68-compliant. Telephone company procedures The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally have to make changes in its equipment, operations or procedures. If these changes might affect your service or the operation of your equipment, the telephone company will give you notice, in writing, to allow you to make any changes necessary to maintain uninterrupted service. If you have any questions about your telephone line, such as how many pieces of equipment you can connect to it, the telephone company will provide this information upon request. In certain circumstances, it may be necessary for the telephone company to request information from you about the equipment which you have connected to your telephone line. Upon request of the telephone company, provide the FCC registration number and the Ringer Equivalence Number ( REN) of the equipment which is connected to your line. Both of these numbers are listed on the equipment label attached to your fax machine. The sum of all RENS on your telephone line should be fewer than five (5) in order to assure proper service from the telephone company. Sometimes, a sum of five (5) may not be usable on a given telephone line. Note: This equipment is hearing-aid-compatible ( HAC) . Notice: The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to u...