Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
– [Disp. Resolution]: [Standard] • The number for “Shooting (still images)” is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) – [Panel Brightness] is set to [3]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The numbers of minutes for movie shooting are based on the CIPA standard, and are for shooting under the following conditions: – Movie quality: AVC HD HQ – Typical movie shooting: Battery life based on repeatedly starting/stopping shooting, zooming, turning on/off, etc. – Continuous movie shooting: Battery life based on non-stop shooting until the limit (29 minutes) has been reached, and then continued by pressing the MOVIE button again. Other functions, such as zooming, are not operated. GB x x The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the micro USB cable (supplied). You can import images to a computer without worrying about draining the battery pack by connecting the camera to a computer using the micro USB cable. In addition, you can use the AC Adaptor AC-UD10 (sold separately) or AC-UD11 (sold separately) for shooting to supply power when shooting. Notes • Power cannot be supplied when the battery pack is not inserted in the camera. • Shooting is not possible when the camera is connected directly to a computer or to a power outlet using the supplied AC Adaptor. • If you connect the camera and a computer using the micro USB cable while the camera is in playback mode, the display on the camera will change from the playback screen to the USB connection screen. Touch (Playback) to switch to the playback screen. GB Inserting a memory card (sold separately) “Memory Stick Micro” media (M2) microSD memory card Make sure that the correct side is facing up. Terminal Printing surface Inserting a memory card (sold separately) “Memory Stick Micro” media (M2) microSD memory card Make sure that the correct side is facing up. Terminal Printing surface 1 Open the cover. 2 Insert the memory card (sold separately). • With the camera lens facing upward, as illustrated, insert the memory card straight in until it clicks into place. • Pushing down on the microSD memory card (in the direction of the battery insertion slot) while inserting it may damage the camera. • Be careful when removing the microSD memory card, as it may pop out quickly. 3 Close the cover. GB 4 4 • A: The memory card is inserted correctly. • B: The memory card is not inserted correctly. Confirm the direction of the memory card and reinsert it straight into the camera. • Only one memory card can be inserted. x Memory cards that can be used Memory card For still images For movies A Memory Stick Micro — Memory Stick Micro (Mark2) microSD memory card (Class 4 or faster) B microSDHC memory card (Class 4 or faster) microSDXC memory card (Class 4 or faster) • In this manual, products in A are collectively referred to as “Memory Stick Micro” media, and products in B are collectively referred to as microSD memory card. x To remove the memory card/battery pack Memory card: Push the memory card in once to eject the memory card. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Notes • Never remove the memory card/battery pack when the access lamp (page 11) is lit. This may cause damage to data in the memory card/internal memory. GB Setting the clock Setting the clock Lens cover 1 Lower the lens cover. The camera is turned on. Date & Time setting is displayed when you turn on the camera for the first time. • You can also turn on the camera by pressing the ON/OFF (Power) button. • It may take time for the power to turn on and allow operation. 2 Select a desired language. 3 Select a desired geographic location by following the on-screen instructions, then touch [Next]. 4 Set [Daylight Savings] or [Summer Time], [Date & Time Format] and [Date & Time], then touch [Next]. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. 5 Touch [OK]. 6 Follow the instructions on the screen. • The battery pack will run out quickly when: – [Disp. Resolution] is set to [High]. GB Shooting still images/movies Shutter button MOVIE (Movie) button Shooting still images/movies Shutter button MOVIE (Movie) button Shooting still images 1 Press the shutter button halfway down to focus. When the image is in focus, a beep sounds and the z indicator lights. 2 Press the shutter button fully down to shoot an image. Shooting movies 1 Press the MOVIE (Movie) button to start recording. • Use the W/T (zoom) lever to change the zoom scale. 2 Press the MOVIE button again to stop recording. Notes • The sound of the lever operating will be recorded when the zoom function operates while shooting a movie. The sound of the MOVIE button operating may also be recorded when movie reco...