Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
5 sec 10 sec 30 sec 1 min Auto The interval is set to suit the selected [Effects] item. The setting is fixed to [Auto] when [Normal] is not selected as the [Effects]. Repeat On Plays back images in a continuous loop. Off After all the images have been played back, the slide show ends. z To add /change Music files You can transfer a desired music file from your CDs or MP3 files to the camera to play back during Slide show. You can transfer music using [ Music Tool] in (Printing, Other) on the HOME screen and the “Music Transfer” software (supplied) installed on a computer. For details, see pages 87 and 89. • You can record up to four pieces of music on the camera (The four preset pieces (Music1-Music4) can be replaced with the ones you transferred). • A maximum length of each music file for music playback of the camera is 180 seconds. • If you cannot play back a Music file due to damage or other malfunctions to the file, execute [Format Music] (page 87) and transfer the music again. For details on the operation 1 page 30 Viewing menu This section explains the menu items available when you press the MENU button in playback mode. For details on how to use the menu, see page 30. (Delete): Deleting images Selects and deletes images on the single-image screen or the index screen. See page 26. (This Image) Deletes the currently selected image. (Multiple Images) Selects and deletes multiple images. (All In This Folder) Deletes all the images in the selected folder. (Slide Show): Playing back a series of images This item has same function as (Slide Show) on the HOME screen. See page 46. (Retouch): Retouching still images after shooting Allows you to make adjustments of a still image or apply special effects to a still image. The original image is retained. Blur the periphery around a chosen point (Soft Focus) 1 Set the center point of the desired image to retouch with v/V/ b/B, then press MENU button. 2 Select [Level] with v/V and press z. Select level of retouch with v/V, then press z again. 3 Adjust the desired range to retouch with W/T button. 4 Select [OK] and press z. Using functions for viewing Viewing menu For details on the operation 1 page 30 (Partial Color) Surround a chosen point in monochrome 1 Set the center point of the desired image to retouch with v/V/ b/B, then press MENU button. 2 Adjust the desired range to retouch with W/T button. 3 Select [OK] and press z. (Fisheye Lens) Apply a fisheye effect around a chosen point 1 Set the center point of the desired image to retouch with v/V/ b/B, then press MENU button. 2 Select [Level] with v/V and press z. Select level of retouch with v/V, then press z again. 3 Select [OK] and press z. (Cross Filter) Add a starburst effect to bright points in the image 1 Select [Level] with v/V and press z. Select level of retouch with v/V, then press z again. 2 Adjust the desired length to retouch with W/T button. 3 Select [OK] and press z. Viewing menu For details on the operation 1 page 30 (Trimming) Crop images to remove unwanted portions 1 Press W/T button to zoom in on the trimming range. 2 Set the point with v/V/b/B, then press MENU button. 3 Select [Image Size] with v/V and press z. Select the image size to be used to save the image, then press z. 4 Select [OK] and press z. (Red Eye Correction) Removes red eye caused by flash Select [OK] with v/V and press z. • You may not be able to remove the red eye effect, depending on the image. When you select [Trimming] • The image size that you can trim may vary depending on the image. • The quality of trimmed images may deteriorate. • Images cannot be retouched while connected to a High Definition TV. Using functions for viewing Viewing menu For details on the operation 1 page 30 (Protect): Preventing accidental erasure Protects images against accidental erasure. (This Image) Protects/unlocks the currently selected image. (Multiple Images) Selects and protects/unlocks multiple images. To protect an image 1 Display the image you want to protect, or select the images on the index screen. 2 Press MENU to display the menu. 3 Select (Protect) with v/V, and select [This Image] with b/B, then press z. The image is protected and the - (Protect) indicator appears on the image. - To select and protect images 1 Press MENU to display the menu. 2 Select (Protect) with v/V, and select [Multiple Images] with b/B, then press z. In single-image mode: 3 Select the image you want to protect with b/B on the control button, then press z. A is attached to the selected image. 4 Press b/B to display other images you want to protect, then press z. 5 Press MENU. 6 Select [OK] with v, then press z. In index mode: 3 Select the image you want to protect with v/V/b/B on the control button, then press z. A is attached to the selected image. 4 Move the highlight to the folder selection bar with b and select the folder that contains the images you want to protect with v/V. Repeat step 3 to select other images. 5 To select all the images in the folder, pre...
Dieses Handbuch ist für folgende Modelle:Kameras - DSC-T25 (2.55 mb)