Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
See the scanner 8 digit code on page 80. 0 0 Recording paper set lever: When this digit is “1”, the recording paper set lever is released. Push it back to set the lever (p. 9). Paper jam near the recording paper entrance: When this digit is “1”, the recording paper is not fed into the unit properly or has jammed near the recording paper entrance. To clear, see page 82. Paper jam under the film cartridge or too much paper on the paper stacker: When this digit is “1”, the recording paper jammed under the film cartridge or there is too much paper on the paper stacker. Clear the jammed paper (p. 81) or remove the printed paper. Cover open: When this digit is “1”, the top cover is open. Close it. Film: When this digit is “1”, film is empty or the film is not inserted in the cartridge correctly. Replace the film or film cartridge with a new one {p. 84) or reinsert the film correctly by referring to step 8 on page 85. Unit overheat: When this digit is “1”, the unit is overheated. Leave it to cool down. 79 For Assistance, Call 1-800-435-7329 (B Error code for “Scanner not ready.” status: 0 0 0 0 0 * Document feed: When this digit is “1", the document is not fed into the unit properly. Reinsert the document. Document jam: When this digit is “1", the document is jammed. Remove the jammed document (p. 83). Cover open: When this digit is “1", the top cover is open. Close it. For example: If “1” appears in the 8 digit code, see the corresponding instructions and solve the problem. e.g. When “Scanner not ready. Error code=00010000” is displayed on the Status Log window: Cause & remedy—The top cover is open. Close it. 80 For Assistance, Call 1-800-435-7329 Clearing a recording paper If the unit does not eject any recording paper during reception or copying, the recording paper has jammed. Remove the jammed paper by following the display message on this page and page 82. When paper has Jammed under the The display will show the following message. PAPER JAMMED Remove the jammed paper as follows. 1 Slide the front cover open lever forward to unlock the front cover and lift to open. 2 Remove the film cartridge. Remove the jammed recording paper. If the film is slack, tighten it by winding the bottom side gears. Incorrect Correct 81 Clearing a ir@€@irdlninig papeir Jam (coot.) e Replace the film cartridge by matching the blue label side of the cartridge with that on the unit. ft? Close the front cover securely by pushing down on IQ) both ends. When paper has jammed near the entrance- The display will show the following message. CHECK PAPER Remove the jammed paper as follows. Pull the recording paper set lever forwards, then pull out the jammed recording paper from the recording paper entrance. When paper has jammed near the recording paper exit The display will show the following message. REMOVE PRINTOUT Remove the jammed paper as follows. <\ Lift the unit slightly and push out the jammed U recording paper from the triangular window on the bottom of the unit. (rfr Remove the jammed recording paper from the (¡L recording paper exit. Olf you cannot remove the jammed paper, remove it by following the steps 1 -4 on page 81. Recording paper set lever 82 If the unit does not release the original document during feeding, remove the document as follows. H Slide the front cover open lever forward to unlock the front cover and lift to open. Remove the jammed document carefully. Close the front cover securely by pushing down on both ends. Front cover Front cover open lever Adjusting tine feeder pressure When no feeding or multiple feeding occurs frequently, adjust the feeder pressure. 1 Slide the front cover open lever forward to unlock the front cover and lift to open. Shift the position of the lever by using an instrument with a pointed end, like a clip or ball-point pen. Position A: When documents do not feed Position B: Standard position (pre-selected) Position C: When documents multiple feed Close the front cover securely by pushing down on both ends. Front cover open lever йтЁпе cam ССткеектд the remaining film You can check the amount of remaining film. Press (FILM REMAINING) while the unit is idle. The display indicates the approximate amount of remaining film. FILM E _!=□□□ F FILM E _ F When the film indicator points to this position, the remaining film will print up to 25 pages of letter size documents. Prepare a new film or film cartridge for replacement. When the unit detects the end of the film, the following message will be displayed. FILM NEAR EMPTY FILM EMPTY The remaining film prints approx. 15 letter size documents. Prepare a new film or film cartridge. The film is empty. Replace the film or film cartridge with a new one. To order replacement parts, see page 6. 1 4 Slide the front cover open lever forward to unlock the front cover and lift to open. Remove the film cartridge. o|f you have purchased a film ...