Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
Specifications Motor specification Wing dimensions Dimensions Product weight Degree of protection Temperature Battery charge Battery Specification Hold-Open time Opening/Closing time Current Power Input AC 110( or 220V) 3.5A max., 0.6A average (Motor) 30Nm 4.5~9.5 seconds (90) 1~35 seconds 12V 1.2AH -20?~+55? (Battery 5?~40?) Door wing width : 75~120 cm Door wing weight : 50~100 kg IP12D 6.5 kg 12V=0.15A (Normal); 0.3A (Peak) Operator: 526(L) x 100(W) x 96(D) Arm: 375 (unit: mm) Voltage: 8~24VDC Maximum current : 4A Output : 65W Frequency: 2400 RPM Torque 1. Cover 2. Motor 3. Reducer 4. Square Couplings 5. Control Board 6. Battery 7. Power Switch 8. Operating Arm 9. Sliding Rail 10. Stopper Ball 11. Baseplate 12. Transformer 13. Encoder 14. Photocell 14 13 2 1 3 5 6 7 4 9 8 EC862636 No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone, Tu-Cheng City, Taipei, Taiwan 23678 Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876 E-Mail: info@gianni.com.tw Website: gianni.tw AD-425S Automatic door operator AD-425S Automatic door operator Features 110/220V Selectable dual voltage The AD-425S operates on either 110V or 220V mains power such that it can be used almost anywhere in the world. Allinone The AD-425S has interfaces for up to six optional devices such as electromagnetic locks, press to open buttons, microwave sensors, card readers and other accessories. Maintain-Open time The door can be adjusted to open for a maximum of 35 seconds. This is suitable for both disabled and wheelchair users. Quiet and Reliable AD-425S is quiet and reliable when operating. Selectable operating speeds Four selectable operating speeds settings and two levels of torque output can be chosen based on the width and weight of the door. Push&Gooption AD-425S includes a switch to select between auto and manual mode. In manual mode, applying force to the door will activate the opening. Remote controls Can be used in conjunction with wireless remote controls. Backup battery In case of mains power failure, a backup battery can maintain normal opening and closing operations up to 250 times. Applicable for all doors AD-425S can be mounted to open outwards or inwards and fits either left or right swinging doors. Safety sensor AD-425S incorporates a safety sensor. When an obstruction is detected the door will be returned to its previous open or closed position to prevent accidents. High accuracy A built in Photocell and encoder are used to control the action of the operating arm. Desired opening angle and appropriate braking distances can be accurately managed. Wide Range It is suitable for doors with width between 75 ~ 120 cm and weight between 50 ~ 100 kg . .See Figure Wing dimensions Wing dimensions B A 10 20 30 40 50 60 70 80 90 100110 120 Door wing width cm () Door wing weight kg () Service Class A: average of up to 600 cycles per day Service Class B: average of under 200 cycles per day GIANNI INDUSTRIES, INC. No. 13, Chung Sing Road, Tu-Cheng Industrial Zone, The products are manufactured under an ISO Tu-Cheng City, Taipei, Taiwan 23678 9001 & QC 080000 Certified Quality Tel: 886-2 2267 0322 / Fax: 886-2 2267 0323 Management Program environment back its E-Mail: info@gianni.com.tw product quality, performance and commitment Website: gianni.tw to customer satisfaction. Copyright 2008 Gianni industries, inc. All rights reserved. DM-CA-AD425S Ver. C Published on 2008.09.19 AD-425S Automatic door operator GIANNI INDUSTRIES, INC. The products are manufactured under an ISO 9001 QC 080000 Certified Quality Management Program environment back its product quality, performance and commitment to customer satisfaction. & Dimension 526 100 375 96 PUSHHOLDON OFFOPEN GO 0 0 1 1 Unit: mm Refer to figure for in-swing door (right-hand). GEM In-swing Install AD-425S on an out-swing door, make sure that the distance between the header and leaf is not more than 60mm, and the space between the header and Sliding Rail mounting hole must be 60mm, on an in-swing door, make sure that the distance between Square Couplings and hinge is not more than 74mm , the space between header and the bottom of AD-425S must be 23mm, and the space between header and Sliding Rail mounting hole must be 39mm. Depending on the door leaf opening 120° Stopper Ball (Max.)60mm 61mm Out-swing Header 23mm 39mm 74mm In-swing Header Copyright 2008 Gianni industries, inc. All rights reserved. DM-CA-AD425S Ver. C Published on 2008.09.19 No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone, Tu-Cheng City, Taipei, Taiwan 23678 Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876 E-Mail: info@gianni.com.tw Website: gianni.tw Application In-swing AD-425S GEM Right-hand Right-hand Out-swing AD-425S Left-hand Left-hand Out-swing AD-425S In-swing AD-425S GEM GEM GEM Out-swing door Right / Left hand In-swing door Right / Left hand To mount the AD-425S depends on the direction way of the doors, out-swing, inswing, right- open and left-hand doors by adjusting the F/R switch and the direction of the Operating Arm. Operating Arm...