Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
Warning: Once deleted, images cannot be restored. 2,4 3 1 Set the POWER switch to PLAY. 2press DEL to display the DELETE menu. DELETE ALL PAGE EXIT OSD + / -SHTR • To exit this menu, press SHTR. ^Press OSD to select ALL in the DELETE menu. DELETE ALL YES NO DEL SHTR • To exit this menu, press SHTR. 4press DEL to select YES in the DELETE ALL menu. PLEASE WAIT • “PLEASE WAIT will be displayed on screen (approx. 90 seconds) as all images are deleted from memory. Deletion is complete when the screen turns solid blue. Important: • While “PLEASE WAIT" is displayed, do not turn off the Digital Camera nor unplug the AC Adaptor because this will cause irreversible damage to the memory, resulting in reduced image storage capacity. 17 Viewing Images on Your TV Screen I Insert the Digital Camera into the Digital Camera Station until it locks. ^^Connect the Digital Camera Station to your TV using the Video cable (supplied) as shown. ^Turn on your TV and select its video input mode. 4set the Digital Camera POWER switch to PLAY. You may select manual or auto playback as described on pages 14 and 15. Note: • For extended periods of use, it is recommended to use the AC Adaptor for a power source. 18 Transferring Your Images (VCR) Video Out 3,5 a If ” t ■ il Kn> Video In Video Cable (Supplied) 71nsert the Digital Camera into the Digital Camera Station until it locks. ^^Connect the Digital Camera Station to your VCR using the Video cable (supplied) as shown. ^Turn on your VCR and select its line input mode. 4se\ the Digital Camera POWER switch to PLAY. You may select manual or auto playback as described on pages 14 and 15. ^Start a recording of the desired images. (Refer to your VCR manual.) Note: • For extended periods of use, it is recommended to use the AC Adaptor for a power source. 19 Transferring Your Images (Windows) System Requirements: • IBM PC/AT or compatible. • MS-Windows 3.1 or Windows 95. • 386SX CPU or higher. {486 recommended.) • RAM: 8MB on-board memory. • 10MB available hard disk space. • 256 Color monitor or full color recommended (24bit per pixel or 16.7M color) •3.5 inch 1,44MB floppy disk drive (for installation). • RS-232C serial port (D-Sub 9-pin). An adaptor is required for a D-Sub 25-pin. • Mouse or other pointing device. PV-DC1000 Driver Installation 7 Turn on the PC (Personal Computer) and start up Windows. ^Insert the floppy disk into a floppy disk drive. ^For Windows 95, select “Bun...” from the Windows 95 Start menu. 4fov Windows 95, type in a:\Setup.exe and click OK. For Windows 3.1, type in a:\Setup.exe and click OK. В Пип , . I Cunen* Okectetf. C:\W1N31 £oonmd Line: ШЖЖ1 IfcSii |«:4S«tup.exe 1 □ Run {¿¡nnüzed швшт or For Windows 3.1, select “Bun...” from the ProgramManager File menu. Fite Manager ßisk Tree yicw Qptions Sÿlndow Help lW!N31\V Open Enter Move... F7 Copy... F8 Delete... Del Rename... Properties... Alt* Enter ШШ t~ С Otytíem G S^delaulpjf ß d) 256cdM.bmp С O accetMt.gip О • It is assumed that your 3.5 inch 1.44MB floppy disk drive is assigned as “A" drive. If not, replace "A” with the appropriate letter. ^Follow the instructions as they appear on your PC screen. 20 Transferring Your Images (Windows) 1 Insert the Digital Camera into the Digital Camera Station until It locks. ^^Connect the Digital Camera Station to your PC (Windows) using the PC connecting cable (supplied) with the arrow mark facing downward. ^Turn on your PC. 4set the Digital Camera POWER switch to PLAY. Note: • For extended periods of use, it is recommended to use the AC Adaptor for a power source. • While the PC communicates to the Digital Camera, the Digital Camera cannot be operated. 'For Windows 95, select Programs/ PalmCam/PalmCam from the Windows 95 Start Menu. For Windows 3.1, Double click the PalmCam icon in the Program Manager. 'Please read the Help information to operate the application. 21 Transferring Your Images (Macintosh) System Requirements: • System 7.1 or later. • 68030 CPU or higher, or Power Macintosh. • 4MB of RAM. (8MB recommended.) • 10MB available hard disk space. • 256 Color monitor or full color recommended (24bit per pixel or 16.7M color) • 3.5 inch 1.44MB floppy disk drive (for installation). • Modem port or printer port (RS-422). • Mouse or other pointing device. PV-DC1000 Driver Installation 1 Turn on the Macintosh. ^^Insert the floppy disk into a floppy disk drive. ^Double click the floppy disk icon. 4ürag the PalmCam Folder where you want to copy. PalmCam 2 items 712Kindisk P-aim С-am Folder mi 'SjTW/. О 22 Transferring Your Images (Macintosh) 1 4 Serial Modem port or printer port PC Connecting Cable for Windows (Supplied) PC Connecting Cable Adaptor for Macintosh (Supplied) Connection Running the Appiication Insert the Digital Camera into the Digital Camera Station until it locks. 'Double click the PalmCam icon. »Connect the Digital...