Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Grizzly Dateigröße: 195.19 kb Dateiname: t21544_m.pdf Unterrichtssprache:

2 "AA" Batteries .................................................... 4 Hex Wrench 4mm.............................................. 1 Mounting Hardware ................................... Varies Mounting There are mounting holes provided through the safe walls that are accessed from inside the safe. Use the provided hardware or fasteners of your choice to firmly anchor your safe to a solid and stable surface. Models T21543 and T21545 are designed to mount on a wall or shelf, and the door must open horizontally to operate correctly. Model T21544 is a floor safe and the door must open vertically for proper operation. NOTICE NEvER keep the safe keys inside the safe. We recommend that you keep each key in a separate secure and accessible location. In the event that both your personal and emergency codes have been forgotten or misplaced, these physical keys will be the only way to unlock your safe. grizzly cannot replace lost or stolen keys. Please contact your local locksmith if this happens. Safe Keys The safe keys can be used to unlock the safe door instead of your personal code or the emergency code. if you have used the key to unlock the safe door, you will have to use it to re-lock the door so that you can remove the key from the door. However, the key cannot be used to re-lock the safe door if a code was used to open it. Refer the next section for detailed instructions regarding using the safe key. Opening Safe Door the First Time 1. After you remove your new safe from the shipping box, detach the two safe keys from the outside of the safe. 2. Use a 4mm hex wrench to remove one of the button head cap screws that secure the brass nameplate, then let the nameplate swing down to expose the keyhole (see Figure 1). nameplate Key Hand indent Figure 1. nameplate moved out of the way to use the key (Model T21543 shown). COPyRigHT © DECEMBER, 2009 By gRizzLy inDUsTRiAL, inC. REVisED APRiL. 2012 (sT). WARNINg: NO PORTION OF ThIS MANUAL MAY bE REPRODUCED IN ANY ShAPE OR FORM WIThOUT ThE WRITTEN APPROvAL OF gRIzzLY INDUSTRIAL, INC. #Ts12358 PRinTED in CHinA 3. Orient one of the keys with the stamped serial number facing up, then insert it into the keyhole. 4. Turn the key 1.4 turn clockwise to unlock the safe door, use the hand indent to pull the door open, then remove the contents of the safe. 5. Remove the battery cover on the back of the safe door, then install the four "AA" batteries provided to activate the digital keypad. 6. Close the safe door, rotate the key 1.4 turn counterclockwise, remove it from the door, then re-attach the nameplate. Personal Code Both your personal code and emergency code can open the safe door, but only your personal code can lock it. To lock the safe door using your personal code: 1. Close the safe door. 2. Use the digital keypad to enter a four-digit personal code of your choice, then press the "#" key to activate the locking mechanism (see Figure 2). The LED window will display the word "CLOSEd ", then your personal code...

Herunterladen

Geben Sie zwei Ziffern: