Stimmen - 1, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
and set the channel number (CH3 or CH4) j on both TV and RF Modulator, whichever is not used for regular broadcasts in your area. Note: j For more details, please refer to the instruction manual of the j RF Modulator. ! Example: DVD video player, VCR, TV and RF Modulator connections TV's back panel Connect the antenna cable (not supplied) to the VHF/UHF FROM ANT IN terminal of the VCR. Connect the 75-ohm coaxial cable (not supplied) between the TO TV OUT terminal of the VCR and the ANT. IN terminal of the RF Modulator. Connect the 75-ohm coaxial cable (not supplied) between the TO TV terminal of the RF Modulator and the VHF/UHF ANTENNA IN terminal of the TV. 4. Connect the Audio/Video cable (supplied) between the | AUDIO OUT and ViDEO OUT jacks of the DVD video player and the AUDIO INPUT and VIDEO INPUT jacks of the RF Modulator. 5. Turn on the TV, and set the channel number (CH3 or CH4) I on all TV, VCR and RF Modulator, whichever is not used for j regular broadcasts in your area. Note: For more details, please refer to the instruction manual of the RF ^ Modulator. 1 -E8- ADDITIONAL CONNECTION EXAMPLES Connecting to an Audio System and TV (Example 2) Connect the DVD video player to an Audio System and a TV. DVD video player To AUDIO OUT œ Notes: • Please refer to the instruction manual of your Audio System and TV. • When you connect the DVD video player to other equipment, be sure to turn off the power and disconnect ail of the equipment from the wall outlet until all the connections have been made. • Do not connect the DVD video player to a VCR directly. The playback picture will be distorted because DVD video discs are copy protected. (B) To AC 120V, 60Hz TV with Audio/Video input jacks ‘Audio cable (not supplied) L AUDIO INPUT m) « Note: Please follow the steps before turn on the power. 1. If your TV has the S-video input jack, connect the DVD video I player with the S-video cable (not supplied). (The VIDEO| OUT jack connection is not necessary.) I You can enjoy clearer picture playback. , 2. Set the VIDEO OUT SELECT switch to the S position. ! 3. You also need to connect the left and right audio cables (not I supplied) to the AUDIO OUT jacks of DVD video player and j the Audio input jacks of the Audio System. I 'Please consult your local audio/video dealer. Note: Please follow the steps before turn on the power. 1. If your TV has the component video input jacks, connect the DVD video player to these jacks. (The VIDEO OUT or S-VIDEO OUT jack connection is not necessary.) You can enjoy high quality picture playback. Set the VIDEO OUT SELECT switch to the COMPONENT position. You also need to connect the left and right audio cables (not supplied) to the AUDIO OUT jacks of DVD video player and the Audio input jacks of the Audio System I 2. To S-video input *S-video cable (not supplied) *Please consult your local audio/video dealer. -E9- Notes: • For VIDEO connection, please refer to 'BASIC CONNECTIONS” on page E7. • Please refer to the instruction manual of your amplifier. • When you connect the DVD video player to your amplifier, be sure to turn off the power and disconnect both units from the wa!1 outlet until ali the connections have been made. Connecting to an Amplifier with Dolby Digital Decoder, DTS Decoder or MPEG2 Decoder (Example 3) diqital audio input Amplifier with Dolby Digital Decoder. DTS Decoder or MPEG2 Decoder —<3> ’Optical cable (not supplied) \ O ' 300 ) o u o! J .□ ü III To DIGITAL OUT CCr.'DONF:.]^','lDEO ÜUT_ Front left speaker Surround left speaker—_ L-fi1) Front righ speaker Subwoofer Before connecting, remove the protective cap from the jack. Replace ’ ! the cover when the jack is not in use. To enjoy Dolby Digital sound Select “Dolby Digital: BitStream” in “Setting Digital Out" on the INITIAL SETTINGS. (See page E28.) To enjoy DTS sound Select “DTS: On” in “Setting Digital Out" on the INITIAL SETTINGS. (See page E28.) To enjoy MPEG2 sound Select “MPEG: BitStream" in “Setting Digital Out” on the INITIAL SETTINGS. (See page E28 ) Connecting to a Digital Amplifier (Example 4) You can enjoy 2 Channel Digital Stereo Sound, Before connecting, remove the protective cap from the jack. Replace the cover when the jack is not in use. _r To digital audio input 'Optical cable (not supplied) To enjoy 2 Channel Digital Stereo sound Select “Dolby Digital: LPCM”, “MPEG: LPCM", and “DTS: Off" in “Setting Digital Out" on the INITIAL SETTINGS. (See page E28.) Note: If “DTS: On" is selected, loud noise will occur. (See page E28.) 7 m-w Jfl! Surround right speaker *Please consult your local audio/video dealer. Manufactured under license from Dolby Laboratories. “Dolby", “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
DVD-Player - DVD-SL30 (1.76 mb)
DVD-Player - DVD-SL30 (1.76 mb)
DVD-Player - DVD-SL30 (1.76 mb)